Streetwize SWINV2000 Information For Use

Streetwize SWINV2000 Information For Use

Modified sine wave inverter

Advertisement

Quick Links

SWINV2000
2000W
4000W PEAK
Information for use
Modified Sine Wave
Inverter

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SWINV2000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Streetwize SWINV2000

  • Page 1 SWINV2000 2000W Modified Sine Wave Inverter 4000W PEAK Information for use...
  • Page 2 Running time at rated continuous rated power Recommended battery 1 hour 12V/200Ah Health & Safety Guidelines IMPORTANT: This inverter is only suitable for use with 12V batteries only. This appliance is primarily designed for operating Class 2 appliances. Warning! Electric Hazard. Keep away from children 1.
  • Page 3 Intention For Use Thank you for purchasing this 2000W modified sine wave inverter from Streetwize. This inverter safely converts your vehicle’s 12V DC battery into a 240V AC power supply for using standard UK electrical appliances that require up to 2000W.
  • Page 4: Product Elements

    Product Elements 1. Modified sine wave inverter 2. Battery clamp connection cables Pure Sine Wave & Modified Sine Wave Inverters There are two types of inverters: Pure Sine Wave & Modified Sine Wave. The figure below shows a graphical comparison of modified sine wave inverters and pure sine wave inverters.
  • Page 5 12V Socket To use the inverter via your vehicle’s 12V socket, simply connect the O-rings of the 12V connection cable to the inverter’s terminals, with the black cable going to the negative terminal and the red cable going to the positive terminal. Plug the 12V plug into the 12V socket, then switch on your vehicle.
  • Page 6: After Use

    After Use After you have finished using the inverter (or when the inverter is not in use), turn off the unit and make sure your vehicle’s fully switched off. Then, turn the unit off and then disconnect the inverter from the 12V power supply. When discon- necting from the battery, disconnect the negative cable first, followed by the positive cable.
  • Page 7: Troubleshooting

    Troubleshooting What To Do When The Inverter Is Not Working Troubleshoot/Problem Possible Cause Suggested Solution No AC out - the green LED light DC input is below 10V Recharge or replace the is not coming on battery No AC output - the inverter is Poor connection with the Switch off vehicle &...
  • Page 8: Technical Support

    (see Technical Specifications) along with the technical query and proof of purchase. Technical Specifications Product Name Streetwize 2000W Modified Sine Wave Inverter 2000W Max Contiuous Power 4000W Peak Power...

Table of Contents