Wayfair Eames Frame Chair Instruction Manual

I PARTS AND SCREWS YOU RECEIVED|
＠ x 1 ＠ x 1
皂 吓
Ax1 Bx4
Z ^
呼
-
This chair made by environmental friendly PP plastic and natural beech wood chair legs, with durable
quality and fashion appearing. The max. loading is 120kg, daily use we recommend do not over 100
kg, so that can prolong the lifespan of the chair.
Open the box and take out the seat surface, seat frame and accessory package. Lay it on with
a packing bag, and place the seat bottom on top of the packing bag. Take out the
accessories from the accessory kit, put (B) through the round hole on (C), and put it in place
for later use. Now take out the shelf (2) and align the holes at the bottom of the seat surface
(1), and then screw the screws into the screw holes one by one by hand. Note that the screws
should be tightened a few turns first. After all the screws have been screwed into the holes,
use (A) to tighten all the screws. The assembly is now complete. Please install other chairs
according to the above method.
USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE
Cx4
©
尸
＿
Note: The seat surface is made of fabric. If the seat surface gets dirty during
assembly, you can try to wipe it with a wet towel and dry it. After the assembly is
completed, if one side of the chair leg is suspended in the air, you can
disassemble the chair, place the shelf flat on the ground, with the suspended leg
facing up, hold the iron pipe with one hand and press it down a few times to solve
the problem of uneven legs. phenomenon. If you have other questions during use,
please feel free to consult our customer service staff.Have a nice day.
A
B
C