Steam Ironing; Water Spray - Maytag SMARTFILL M1400 Quick Start Manual

STEAM IRONING

A
B
10
FOR STEAM IRONING
1. Fill the Removable Water Tank. Move the Steam
Control & Self-Clean Dial to the desired steam
level by pushing the dial toward the front of the
(image A).
iron
2. Plug the iron into an outlet while on its heel.
3. Turn on the iron by pressing the Temperature
Control Button and choose the temperature
setting appropriate for your fabric.
4. Preheat time takes about 60 seconds,
depending on the setting.
5. Begin to iron. While ironing, press the
Steam Burst Button for steam (image B).
It takes a few seconds for steam to reboot
between bursts.
6. When finished ironing, turn the iron off by
pressing the Temperature Control Button for
three seconds, then unplug the iron. Remember
to move the Steam Control & Self-Clean Dial
back to the "Off" position
when finished.
7. Let the iron cool to room temperature before
handling and storing.

WATER SPRAY

A
B
FOR WATER SPRAY
Water spray can help eliminate wrinkles.
Water can be sprayed at any setting as long as the
Removable Water Tank is filled
1. Aim the Spray Nozzle at your desired area. See
illustration to locate the Spray Nozzle
2. Press the Spray Button control (image B)
3. If the spray is weak, try pushing the button a few
times to pump water.
(image A).
to spray.
11