MOTOR ASSEMBLY
ROTOR
DAMPER
1. Disassemble the BACK COVER.
2. Remove the bolt.
3. Pull out the ROTOR.
4. Unscrew a screw from the bracket.
5. Remove the 6 bolts on the stator.
6. Unplug the connector from the STATOR.
1. Disassemble the damper hinges from the tub and base.
NOTE
When replacing dampers, replace them as a set
rather than individually.
There are several iterations of dampers available.
Be sure all four in the set are the same class.
53
38