LG GCWM1069CS7 Service Manual page 38

Packing Material Removal
Checkpoint. Has the packing material been removed?
Make sure the tub support and all four shipping bolts have been removed.
This packing material helps to support the outer tub during transit, so that it does not shift.
If not removed, the inner drum will turn, but the outer tub will not be able to shift as needed.
4 Shipping bolts
Shipping bolts are made of two parts.
One is 'rubber + plastic' and the other is 'metal'.
All parts must be removed from the washer!!
rubber + plas c
metal
Leveling
Is the unit leveled?
To check the leveling:
1. Perform a diagonal test. Push down on each corner of the unit.
How to perform a diagonal test:
2. Use a bubble level and make sure unit is leveled from le to right, front to back, and diagonally.
If the unit is not leveled properly, it will vibrate.
Many vibra on issues are the result of the unit not being leveled properly.
Place your right hand on the back-right corner and your le hand on the front-le corner of
the unit, then a empt to rock the unit from corner to corner.
Then, move your right hand to the front-right side and your le hand to the back-le
corner and a empt to rock the unit from corner to corner.
If the unit is level, it will not rock. However, if the unit is not level, it will rock.
If the unit rocks, it will be necessary to adjust the leveling feet of the unit.
Adjust the foot under the hand that is on the front of the machine.
38
Carton Base Foam Tub Support
You can separate power cord from the washer
a er removing shipping bolts.