Siemens SN23EW14AE User Manual page 45

Fault
E:32-00 will light up altern-
ately or indicator for water
supply lights up.
E:34-00 will light up altern-
ately.
E:61-02 will light up altern-
ately.
E:61-03 will light up altern-
ately. Water is not drained.
Cause
Water is continuously run-
ning into the appliance.
Wastewater pump is
blocked.
Cover of the wastewater
pump is loose
Wastewater hose is blocked
or kinked.
Siphon connection is still
sealed.
Cover of the wastewater
pump is loose.
Troubleshooting en
Troubleshooting
Remove the filter from the supply
5.
hose
Clean the filter.
6.
Re-insert the filter in the supply
7.
hose.
Screw the water connection back
8.
on.
Check the water connection for
9.
leaks.
Restore the power supply.
10.
Switch the appliance on.
11.
Turn off the water tap.
1.
Call "Customer Service"
2.
→ Page 58.
Clean the wastewater pump.
▶
→ "Clean wastewater pump",
Page 57
Secure the cover of the "Wastewa-
▶
ter pump " → Page 57 so it clicks
into position.
Reposition the wastewater hose
1.
without kinks.
Remove residues.
2.
Check the connection to the siphon
▶
and open if necessary.
Secure the cover of the "Wastewa-
▶
ter pump " → Page 57 so it clicks
into position.
45