Table of Contents
Advertisement
Troubleshooting
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced with a
▶
special connection cable, which is available from the manufacturer or his
Customer Service.
Appliance safety
Fault
Appliance door does not
open at the end of the pro-
gramme.
Cause
Automatic door opening is
not activated.
Door is not correctly adjus-
ted.
Appliance door and door
seal are soiled.
Wrong screws used to ad-
just the door gap.
The safety device switches
off automatic door opening.
Appliance door brushes
against the appliance or kit-
chen cabinets
Troubleshooting en
Troubleshooting
Activate the automatic door open-
▶
ing.
→ "Overview of basic settings",
Page 35
Adjust the appliance door as de-
▶
scribed in the installation instruc-
tions.
The door gap must be at least
70 mm - 100 mm.
Clean the appliance door and door
▶
seal with a damp cloth and a little
washing-up liquid.
Use size 4X30 bolts to adjust the
▶
door gap.
The bolts are included in the scope
of supply.
If you use bolts that are too long,
this can deactivate the function of
automatic door opening.
Call "Customer Service."
▶
→ Page 58
Install the appliance correctly as de-
▶
scribed in the installation instruc-
tions and align.
43
Advertisement
Table of Contents
