Configuration; Time Display; Network - Technaxx TX-187 User Manual

Configuration

Set up and configure the device.

Time Display

Enter the setting to choose Analog or Digital clock for standby display.
Choosing digital, set the color of the digital clock numbers as well.
Confirm your choice by pressing Enter.

Network

Wireless Network Configuration:
Enable / disable WiFi network.
When you enable the WiFi network, the system
will automatically scan for WiFi networks in the
range of the TX-187.
Select your required WiFi router.
You may refer to the chapter First start, for
detailed network setting.
Wireless Network (WPS PBC):
If you are using a router with WPS/QSS button,
you may set up the network connection simple via
WPS function. Enable the connection by entering
the setting. After that press the WPS/QSS button
on your router within 120seconds. The
connection between the router and TX-187 will
then be configured automatically.
Manual Configuration:
Set the wireless configuration manually. You can choose DHPC (IP
assigned automatically) or manually input IP address for wireless network
connection.
After that set the SSID choose the encryption code to connect the WIFI.
If the wireless network connection is not existed or failed, the icon at the
top left corner will have a cross on it.
18
Model: TX-187 Article No. 5001, 06/2022