Built-In Switch Setup; Preview - Security Camera King NVR-ELE8M-4KS Manual

4.5.7 Built-in Switch Setup

The built-in switch function is for product of PoE port.
From Main menu->Setting->Network->Switch, you can set switch IP address, subnet mask, gateway and
etc. See Figure 4-26.

4.6 Preview

After device booted up, the system is in multiple-channel display mode. See Figure 4-27.Please note the
displayed window amount may vary. The following figure is for reference only. Please refer to chapter 1.3
Specifications for the window-amount your product supported.
4.6.1 Preview
Figure 4-26
Figure 4-27
129