Table of Contents
Advertisement
5.14 Miscellaneous Setup - Hidden Channel
MISCELLANEOUS SETUP
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
AUDIO PORT SETUP
PTZ SETUP
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
VGA SETUP
(
)MOVE (SEL)SELECT (MENU)EXIT
5.15 Miscellaneous Setup - Audio Port Setup
AUDIO PORT SETUP
AUDIO PORT1-VIDEIO CHANNEL
AUDIO PORT1-RECORD
AUDIO PORT2-VIDEO CHANNEL
AUDIO PORT2-RECORD
(
)MOVE (SEL)SELECT (MENU)EXIT
Note: For 4-ch DVR, there are 2 audio inputs;
For 9-ch DVR, there are only 1 audio input.
5.16 Miscellaneous Setup - PTZ Setup
PTZ SETUP
SPEED
PROTOCOL
CAMERA- [ 1 ]
ID [ 1 ]
(
)MOVE (
(SEL)SELECT
(MENU)EXIT
Press [SEL] to select the camera, press[
Note: the ID must be unique．
[ 4 ]
[ CH4 ]
[ OFF ]
[ ON ]
800*600 60HZ
[ 1 ]
[ OFF ]
[ 2 ]
[ ON ]
[4800]
[PELCO-D]
)CAM ID
The system provides a function to hide a
channel in monitoring mode. The selected
channel can still be recorded while it's hidden;
the hidden picture is viewable during playing
back.
Press [SEL] to select a channel to hide.
You can select the audio recording
function to ON or OFF, and select the
video channel that you like to record the
audio on.
SPEED: Set the baud rate (4800，9600，
19200， 38400) match to your speed dome.
PROTOCOL: Supports "PELCO-D" and
"PELCO-P". Select the protocol
according to your speed dome's protocol.
CAMERA: select the camera channel
which is connected with the speed dome.
ID: Assign an ID to your speed dome.
] and [
] buttons to assign the ID.
9
User Manual
Advertisement
Table of Contents
