smartmi Evaporative Humidifier 2 User Manual page 8
Hide thumbs
Also See for Evaporative Humidifier 2:
- User manual (109 pages) ,
- User manual (23 pages) ,
- User manual (33 pages)
Table of Contents
Advertisement
Available languages
Available languages
Use
Features
On-off/settings switchover
Press the "On-off/settings" button
humidifier on. When the humidifier is turned on for the
first time, the default setting is Automatic. Press the
button to switch settings. Press and hold the button for
2 seconds to turn the humidifier off.
Press the "On-off/settings" button
between Level 1
, Level 2
Automatic
in turn.
Display brightness adjustment
Press the "Display brightness" button
brightness of the display and switch between bright, dim,
and off.
Wi-Fi resetting
Press and hold the "Display brightness" button
"On-off/settings" button
icon will flash, showing that the humidifier is waiting for a
connection and that the Wi-Fi has been reset successfully.
，to turn the
，to switch
, Level 3
and
，to adjust the
and
for 5 seconds. The Wi-Fi
Connect with Mi Home
/ Xiaomi Home APP
This product works with Mi Home / Xiaomi Home app
*. Control your device, and interact it and other smart
home devices with Mi Home / Xiaomi Home app.
Scan the QR code to download and install the app. You
will be directed to the connection setup page if the app
is installed already. Or search "Mi Home / Xiaomi Home"
in the app Store to download and install it.
Open Mi Home / Xiaomi Home app, tap "+" on the
upper right, and then follow prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe (except
for Russia). The name of the app displayed on your device
should be taken as the default.
Note: The version of the app might have been updated, please
follow the instructions based on the current app version.
7
Advertisement
Table of Contents
Need help?
Do you have a question about the Evaporative Humidifier 2 and is the answer not in the manual?
Questions and answers
как очистить испаритель от загрязнений
To clean the evaporator of the Smartmi Evaporative Humidifier 2, follow these steps:
1. Remove the Top Housing: Take off the top part of the humidifier.
2. Add Water: Fill the water tank to the medium level.
3. Add Citric Acid: Pour 10 to 30 milliliters of food-grade citric acid (such as lemon juice extract) into the water tank.
4. Start Self-Cleaning Mode: Place the top housing back and hold the display brightness button for 3 seconds to activate self-cleaning mode. The evaporator will rotate to clean itself and deodorize the tank.
5. Run for 30 Minutes: Let the self-cleaning mode run for at least 30 minutes. Perform this cleaning every two weeks.
6. Odor Removal (if needed): If the evaporator develops an odor, add 100 milliliters of diluted hypochlorite solution (100 mg/L concentration) and run the cleaning mode for 30 minutes.
7. Temperature Precaution: Ensure the water temperature does not exceed 35°C to prevent damage.
These steps help maintain the evaporator and prevent contamination.
This answer is automatically generated