smartmi Evaporative Humidifier 2 User Manual page 4

Hide thumbs Also See for Evaporative Humidifier 2:

User manual (109 pages)

User manual (17 pages)

User manual (23 pages)

Table Of Contents

Table of Contents

Available languages

Precautions

Handling

· Always turn the humidifier off and unplug it before moving it.

· Before handling or moving the humidifier, drain any remaining water from the water tank.

Installation

· Follow the instructions to install the humidifier correctly and prevent electric shocks, fire,

personal injury, and other damage.

· Do not turn the humidifier on before it is fully assembled.

Adapter

Follow the instructions below when using the adapter to prevent electric shocks, fire, or damage：

· Connect the adapter plug to an appropriate outlet.

· Do not pinch, bend, or twist the adapter cord excessively. Otherwise, the wire inside may be

broken or exposed.

· Unplug the humidifier before servicing or moving the humidifier.

· Power the humidifier using the standard adapter supplied with the humidifier. Due to safety

considerations, damaged adapters or power cords must be replaced by the manufacturer or a

professional from a designated repair service provider.

· If the humidifier generates abnormal noises, produces odors or becomes hot, turn it off immediately.

In use

· Do not put fingers or foreign objects into safety parts, movable parts, air inlets or outlets.

· Do not let objects such as hair or fabric come near the main unit, as these objects may get caught

in or block the air inlets and outlets.

· Do not lean on or tilt the humidifier while in use.

· Ensure sufficient ventilation when using the humidifier at the same time as household gas

appliances (such as gas stoves and gas water heaters) to prevent carbon monoxide poisoning.

· The reset alarm may fail if water accumulates in the upper housing. The alarm will function

normally again after the water has evaporated.

Table of Contents

Need help?

Do you have a question about the Evaporative Humidifier 2 and is the answer not in the manual?

Questions and answers

Николай

March 1, 2025

как очистить испаритель от загрязнений

1 comments:

Mr. Anderson

March 1, 2025

To clean the evaporator of the Smartmi Evaporative Humidifier 2, follow these steps:

1. Remove the Top Housing: Take off the top part of the humidifier.
2. Add Water: Fill the water tank to the medium level.
3. Add Citric Acid: Pour 10 to 30 milliliters of food-grade citric acid (such as lemon juice extract) into the water tank.
4. Start Self-Cleaning Mode: Place the top housing back and hold the display brightness button for 3 seconds to activate self-cleaning mode. The evaporator will rotate to clean itself and deodorize the tank.
5. Run for 30 Minutes: Let the self-cleaning mode run for at least 30 minutes. Perform this cleaning every two weeks.
6. Odor Removal (if needed): If the evaporator develops an odor, add 100 milliliters of diluted hypochlorite solution (100 mg/L concentration) and run the cleaning mode for 30 minutes.
7. Temperature Precaution: Ensure the water temperature does not exceed 35°C to prevent damage.

These steps help maintain the evaporator and prevent contamination.