Product Overview - smartmi Evaporative Humidifier 2 User Manual

Hide thumbs Also See for Evaporative Humidifier 2:

User manual (109 pages)

User manual (33 pages)

User manual (17 pages)

Table Of Contents

Table of Contents

Available languages

Product overview

Read this manual carefully before use, and retain it for future reference.

Air outlet/water inlet

Control panel

Upper housing

Evaporator

Temperature

and humidity

sensor

Evaporator knob

Water tank

Water level detector

Maximum water level

Lower housing

Power adapter

Vent

Table of Contents

Need help?

Do you have a question about the Evaporative Humidifier 2 and is the answer not in the manual?

Questions and answers

Николай

March 1, 2025

как очистить испаритель от загрязнений

1 comments:

Mr. Anderson

March 1, 2025

To clean the evaporator of the Smartmi Evaporative Humidifier 2, follow these steps:

1. Remove the Top Housing: Take off the top part of the humidifier.
2. Add Water: Fill the water tank to the medium level.
3. Add Citric Acid: Pour 10 to 30 milliliters of food-grade citric acid (such as lemon juice extract) into the water tank.
4. Start Self-Cleaning Mode: Place the top housing back and hold the display brightness button for 3 seconds to activate self-cleaning mode. The evaporator will rotate to clean itself and deodorize the tank.
5. Run for 30 Minutes: Let the self-cleaning mode run for at least 30 minutes. Perform this cleaning every two weeks.
6. Odor Removal (if needed): If the evaporator develops an odor, add 100 milliliters of diluted hypochlorite solution (100 mg/L concentration) and run the cleaning mode for 30 minutes.
7. Temperature Precaution: Ensure the water temperature does not exceed 35°C to prevent damage.

These steps help maintain the evaporator and prevent contamination.