Adjusting Camera Image Coordinates - VOLTCRAFT WBP-120 Operating Instructions Manual

Measuring points:
Manually set measuring points.
Touch button repeatedly to set points (max. 3 points). Touch and move
points to position.
Hide analysis:
Hide temperature analysis.

12.7 Adjusting camera image coordinates

If you have to position the thermal imager at a particular angle, you can adjust the
camera image coordinates to move the camera image in the right place.
1. Select > Measure Setting > Image align.
2. Use the directional arrows to adjust the (x,y) coordinates of the camera image.
3. Touch to save the set coordinates or touch to cancel.
70