OST iConverter User Manual

O1.5h

Advertisement

iConverter
®
2-Module Power Chassis
User Manual
38 Tesla, Irvine, CA 92618 USA
Phone: (949) 250-6510
General and Copyright Notice
This publication is protected by U.S. and international copyright laws. All rights reserved.
The whole or any part of this publication may not be reproduced, stored in a retrieval
system, translated, transcribed, or transmitted, in any form, or by any means, manual,
electric, electronic, electromagnetic, mechanical, chemical, optical or otherwise, without
prior explicit written permission of Omnitron Systems Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.: FlexPoint
FlexSwitch
, HybridNID
, iConverter
TM
®
OmniConverter
, RuggedNet
, Omnitron Systems Technology, Inc.
®
®
Omnitron logo.
All other company or product names may be trademarks of their respective owners.
The information contained in this publication is subject to change without notice.
Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors.
Warranty
This network product and the included AC/DC power adapter are warranted to the
original purchaser (Buyer) against defects in material and workmanship for a period of
two (2) years from the date of shipment. The warranty for the network product can be
extended to lifetime by registering the product at www.omnitron-systems.com/support
within ninety (90) days from the date of shipment. During the warranty period, Omnitron
will, at its option, repair or replace a product which is proven to be defective with the
same product or with a product with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility, at
Buyer's expense. Omnitron will pay the shipping charge to return the product to Buyer's
designated US address using Omnitron's standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to product malfunctions resulting from improper
or inadequate use and/or maintenance of the equipment by Buyer, Buyer-supplied
equipment, Buyer-supplied interfacing, unauthorized modifications or tampering
with equipment (including removal of equipment cover by personnel not specifically
authorized and certified by Omnitron), or misuse, or operating outside the environmental
specification of the product (including but not limited to voltage, ambient temperature,
radiation, unusual dust, etc.), or improper site preparation or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied
warranties of merchantability and fitness for any particular purpose.
The remedies provided herein are the Buyer's sole and exclusive remedies. Omnitron
shall not be liable for any direct, indirect, special, incidental, or consequential damages,
whether based on contract, tort, or any legal theory.
Environmental Notices
The equipment covered by this manual must be disposed of or recycled in accordance
with the Waste Electrical and Electronic Equipment Directive (WEEE Directive) of
the European Community directive 2012/19/EU on waste electrical and electronic
equipment (WEEE) which, together with the RoHS Directive 2015/863/EU, for electrical
and electronic equipment sold in the EU after July 2019. Such disposal must follow
national legislation for IT and Telecommunication equipment in accordance with the
, miConverter
, NetOutlook
, OmniLight
®
TM
®
, OST
TM
TM
Page 2
,
TM
,
®
and the

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iConverter and is the answer not in the manual?

Questions and answers

Summary of Contents for OST iConverter

  • Page 1 Omnitron Systems Technology, Inc. The following trademarks are owned by Omnitron Systems Technology, Inc.: FlexPoint FlexSwitch , HybridNID , iConverter , miConverter , NetOutlook , OmniLight ®...
  • Page 2: Product Overview

    The equipment is marked with the WEEE symbol shown to indicate that it must or DC power supply and can accommodate up to two iConverter media converters. It be collected separately from other types of waste. In case of small items the symbol is ideal for enterprise Local Area Network (LAN) or Metropolitan Area Network (MAN) may be printed only on the packaging or in the user manual.
  • Page 3: Application Examples

    Trap, which reports loss of power input or chassis power supply failure. This feature The figure below depicts a typical in-band managed fiber to UTP conversion at a requires an iConverter management module be installed in the chassis. When power Customer’s Premises (CP) or at a remote network edge. In-band management is a...
  • Page 4: Installing Modules

    Installation of the equipment should be such that the air flow in the front and back of the unit is not compromised or restricted. This application uses a 4TxVT 4-Port 10/100 switch module and an iConverter Network Management Module (NMM2) for management. Both modules are plugged into the Installing this equipment into a rack in such a way as to make it unstable may cause 2-Module chassis.
  • Page 5: Specifications

    DC Powered Chassis Site Preparation and Cabling The over current protection for the connection with centralized DC shall be provided in the building installation and shall be a UL listed breaker rated at 20 Amps, and installed per the National Electrical Code, ANSI/NFPA-70. This equipment requires 18-60VDC/1.0Amp (8235) or 2.0Amp (8236 and 8238) rated power.
  • Page 6 AC Power Specifications 2-Module AC Description 2-Module AC 2-Module AC High Airflow Model Number 8230-x 8231-x 8232-1 Input Power 100 to 240VAC, 100 to 240VAC, 100 to 240VAC, Requirements 50/60Hz 50/60Hz 50/60Hz (typical) 0.5A @ 120VAC 0.5A @ 120VAC 0.5A @ 120VAC 8.5 watts 16.5 watts 16.5 watts...

Table of Contents