OST iConverter 8240 Series User Manual

1-module power chassis

Advertisement

Quick Links

iConverter
®
1-Module Power Chassis
User Manual
38 Tesla, Irvine, CA 92618 USA
Phone: (949) 250-6510; Fax: (949) 250-6514

General and Copyright Notice

This publication is protected by U.S. and international copyright laws. All rights reserved. The
whole or any part of this publication may not be reproduced, stored in a retrieval system,
translated, transcribed, or transmitted, in any form, or by any means, manual, electric,
electronic, electromagnetic, mechanical, chemical, optical or otherwise, without prior explicit
written permission of Omnitron Systems Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.: FlexPoint
FlexSwitch
, HybridNID
, iConverter
TM
®
OmniConverter
, RuggedNet
, Omnitron Systems Technology, Inc.
®
®
Omnitron logo.
All other company or product names may be trademarks of their respective owners.
The information contained in this publication is subject to change without notice. Omnitron
Systems Technology, Inc. is not responsible for any inadvertent errors.

Warranty

This network product and the included AC/DC power adapter are warranted to the original
purchaser (Buyer) against defects in material and workmanship for a period of two (2) years
from the date of shipment. The warranty for the network product can be extended to lifetime
by registering the product at www.omnitron-systems.com/support within ninety (90) days
from the date of shipment. During the warranty period, Omnitron will, at its option, repair or
replace a product which is proven to be defective with the same product or with a product
with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility, at Buyer's
expense. Omnitron will pay the shipping charge to return the product to Buyer's designated
US address using Omnitron's standard shipping method.

Limitation of Warranty

The foregoing warranty shall not apply to product malfunctions resulting from improper or
inadequate use and/or maintenance of the equipment by Buyer, Buyer-supplied equipment,
Buyer-supplied interfacing, unauthorized modifications or tampering with equipment
(including removal of equipment cover by personnel not specifically authorized and certified
by Omnitron), or misuse, or operating outside the environmental specification of the product
(including but not limited to voltage, ambient temperature, radiation, unusual dust, etc.), or
improper site preparation or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied
warranties of merchantability and fitness for any particular purpose.
The remedies provided herein are the Buyer's sole and exclusive remedies. Omnitron shall
not be liable for any direct, indirect, special, incidental, or consequential damages, whether
based on contract, tort, or any legal theory.

Environmental Notices

The equipment covered by this manual must be disposed of or recycled in accordance with
the Waste Electrical and Electronic Equipment Directive (WEEE Directive) of the European
Community directive 2012/19/EU on waste electrical and electronic equipment (WEEE)
which, together with the RoHS Directive 2015/863/EU, for electrical and electronic equipment
sold in the EU after July 2019. Such disposal must follow national legislation for IT and
Telecommunication equipment in accordance with the WEEE directive: (a) Do not dispose
, miConverter
, NetOutlook
, OmniLight
®
TM
®
, OST
TM
Page 2
,
TM
,
®
and the
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iConverter 8240 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for OST iConverter 8240 Series

  • Page 1 , OmniLight ® ® ® ® OmniConverter , RuggedNet , Omnitron Systems Technology, Inc. , OST and the ® ® Omnitron logo. iConverter ® All other company or product names may be trademarks of their respective owners. The information contained in this publication is subject to change without notice. Omnitron Systems Technology, Inc.
  • Page 2 iConverter 1-Module Power Chassis waste equipment with unsorted municipal and household waste. (b) Collect equipment waste separately. (c) Return equipment using collection method agreed with Omnitron. User Manual Product Overview The equipment is marked with the WEEE symbol shown to indicate that it must be The 1-Module iConverter Power Chassis supports a single iConverter module and is powered collected separately from other types of waste.
  • Page 3 Dying Gasp Trap 2.1mm center connector and supplies a nominal 48VDC. The DC barrel connector on the 8240-x and 8241-x is a 2.5mm center connector and supplies a nominal 9VDC. The 8241-1, 8241-2, 8243-1, 8243-2 and 8243-9 chassis feature Dying Gasp Trap, which If installing with the NEBS Mounting Kit for 8242-x and 8243-x models, secure the grounding reports loss of power input or chassis power supply failure.
  • Page 4 Specifications Prepare a power cable using a three conductor insulated wire (not supplied) with 12AWG to 14AWG thickness. Cut the power cable to the length required. 1-Module Chassis Common Specifications Strip approximately 3/8 of an inch of insulation from the power cable wires. Model All Models Number...

This manual is also suitable for:

Iconverter 8241 seriesIconverter 8242 seriesIconverter 8242-9Iconverter 8243-9Iconverter 8243-1Iconverter 8243-2

Table of Contents