Device Layout; B-540-Rx-330-Ir Receiver - Binary B-540-RX-330-IR Installation Manual

4. DEVICE LAYOUT

4.1. B-540-RX-330-IR Receiver

A B C
IR IR
Flasher Receiver
HDMI OUT
Back
A. IR Flasher
IR output to connect to IR Flasher
B. IR Receiver
IR input to connect to IR Receiver or to output of a control system
C. HDMI Out
HDMI Output to connect to the HDMI input of a sink (display)
D. DIP Switch
IR RCVR PWR OFF/ON
OFF to connect to control system | ON to connect to IR receiver
E. Update (USB type Mini-B)
To connect USB cable A to Mini-B when updating firmware
F. HDBaseT (RJ45)
To connect to the HDBaseT RJ45 port on HDBaseT transmitter
G. Link LED
Lights up green when synced with a transmitter
H. Power LED
Lights up blue when the unit has power
I. Thread-locking Power Connector
Connect to A 12V DC, 2A power supply
D
FIGURE 1: Receiver Layout
5
E F G
OFF
12V DC
Front
H I
12V DC
INPUT