Page 2
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire or electric shock, read and follow all instructions and warnings in this manual. Keep this manual for future reference. 1. Do not expose this apparatus to rain or moisture. Do not expose this equipment to dripping or splashing, and ensure that no objects filled with liquids, such as vases, are placed on the equipment.
1. PRODUCT OVERVIEW Welcome to Binary™. This product is engineered to provide years of exceptional reliability. We appreciate your business, and we stand committed to providing our customers with the highest degree of quality and service in the industry. This device extends HDMI over a single category cable using HDBaseT technology allowing video and audio transmission to remote displays.
4. DEVICE LAYOUT 4.1. B-540-RX-330-IR Receiver 12V DC INPUT Flasher Receiver HDMI OUT 12V DC Back Front FIGURE 1: Receiver Layout A. IR Flasher IR output to connect to IR Flasher B. IR Receiver IR input to connect to IR Receiver or to output of a control system C.
CAUTION: Do not connect power to the device until all other connections are made and the unit is installed. 5.1. B-540-RX-330-IR Receiver Installation 1. Run Category cable from the location of the transmitter to the remote location of the receiver.
6.1. HDBaseT Link (RJ45) Connection This device is specified to operate with Category cables for communication between the transmitter and receiver. The transmission path may include a maximum of two keystones and two patch cables, as long as the total length does not exceed 330’ for Cat5e/6/6a/7 when used with an HDBaseT transmitter.
Page 8
12V DC INPUT Flasher Receiver HDMI IN HDBaseT Back Front HDBaseT B-540-RX-330-IR Receiver Back Front IR Flasher HDTV IR Receiver FIGURE 4: IR Connections Note: Arrow direction indicates signal flow. IR Receiver In-3.5 mm Stereo—See Section 6.2.1 IR Receiver In-3.5 mm Mono—See Section 6.2.2 ...
6.2.1. Point-to-Point IR Control - Stereo (3.5mm) IR Receiver When using a powered IR receiver, the DIP switch for IR RCVR PWR should be set to ON. In this case a 3.5mm (1/8") stereo jack has to be used to send 9V DC power to the receiver.
9. WARRANTY 2-Year Limited Warranty This Binary product has a 2-Year limited warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been abused, modified or disassembled.