Using The System - Clifford Responder LC 50.7X Owner's Manual

Using the system

Please note the screen shot to the right of a feature indicates what the
display looks like when this feature is activated.
Arm
Command
:
Feedback
:
Notes
:
Details
will flash once. If the power door locks have been connected, the
doors will lock. The system will automatically check for errors when it
confirm arming. If no arm confirmation is received, the remote will give
the Out-Of-Range signal.
If errors are found when arming:
If an alarm trigger zone – such as a door, the trunk, the hood, or a
ignore, this trigger zone. This allows the system to continue to protect
your vehicle using the remaining trigger zones.
You are notified of this active zone immediately after arming the system.
indicator in the vehicle will blink in a pattern to indicate the active
zone number error which was found (See Table of Zones). The 2-way
the active zone..
© 2008 Directed Electronics. All rights reserved.
Press one time to Arm
Lock Icon will appear, and one beep
from remote
the system and then activate the
Panic output
17