1. Manuals
  2. Brands
  3. Meyer's Manuals
  4. Spreader
  5. MS400
  6. Operator's manual / parts book

Meyer's MS400 Operator's Manual / Parts Book

Heavy duty manure spreaders
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operators Manual & Parts Book – Rev A2
HEAVY DUTY MANURE SPREADERS
MS400
Model:
DO NOT
Operate This Spreader Until You Have Completely
-
Read This Book!
NEVER
Repair or Clean This Spreader While PTO is Engaged!
-
Manufactured in DORCHESTER, WI by
MEYER'S EQUIPMENT
MFG. CORP.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MS400 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Meyer's MS400

Summary of Contents for Meyer's MS400

  • Page 1 Operators Manual & Parts Book – Rev A2 HEAVY DUTY MANURE SPREADERS MS400 Model: DO NOT Operate This Spreader Until You Have Completely Read This Book! NEVER Repair or Clean This Spreader While PTO is Engaged! Manufactured in DORCHESTER, WI by MEYER’S EQUIPMENT...
  • Page 2 MS400 SPECIFICATIONS Width of Box Inside 80-1/2” Box Flare Width 101-1/2” Overall Width 137” (Standard Tires) Length of Box Inside 178” (To Gate) Overall Length 326” (w/ Beaters) Overall Box Depth 47-1/2” Overall Height 130” (w/ Front Rock Guard) Overall Height 174”...

  • Page 3: Introduction

    INTRODUCTION Congratulations on the purchase of your new Meyer’s Manure Spreader! With proper use and preventative maintenance, it will give you many years of trouble-free operation. • At the front of this manual is a Product Registration and Inspection Certificate. Be sure your dealer has completed this certificate and forwarded a copy to the manufacturer to validate the manufacturer’s warranty.

  • Page 4: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION ..............................3 SAFETY SYMBOLS ............................. 7 SAFETY DECALS & LOCATIONS ........................8 MANURE SPREADER SAFETY ........................13 MANDATORY SAFETY SHUTDOWN PROCEDURE ..................14 PRESSURIZED HYDRAULIC FLUID AND EQUIPMENT SAFETY ..............15 PRE-OPERATION ............................. 16 GENERAL ................................. 16 TRACTOR HITCH AND PTO REQUIREMENTS ......................
  • Page 5 REPLACEMENT PARTS ............................. 32 BOX PARTS, SHIELDS, & MISC..........................32 HYDRAULIC END GATE & RELATED PARTS ....................... 34 AXLES & RELATED PARTS, STANDARD ........................36 AXLES & RELATED PARTS, OPTIONAL FLOTATION ....................38 BEATER DRIVELINE & RELATED PARTS ........................40 VERTICAL BEATER ATTACHMENT ..........................
  • Page 6 THIS PAGE INTENTIONALLY LEFT BLANK P a g e M o d e l M S 4 0 0...

  • Page 7: Safety Symbols

    SAFETY SYMBOLS A brief definition of signal words that may be used in this manual: DANGER : Indicates an imminently hazardous situation that, if not avoided, will result in serious injury or death. WARNING : Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury.

  • Page 8: Safety Decals & Locations

    SAFETY DECALS & LOCATIONS REFERENCE PAGES 9-11 FOR DECAL LETTERS AND PART #’S VERTICAL BEATER ATTACHMENT COMBINATION BEATER ATTACHMENT P a g e M o d e l M S 4 0 0...
  • Page 9 MODEL MS400 SHOWN M o d e l M S 4 0 0 P a g e...
  • Page 10 DECAL D - #3006 DECAL A - #3004 DECAL B - #3003 DECAL E - #SW2000 DECAL F - #SW700 DECAL C - #SW105 DECAL G - #SW2001 10 | P a g e M o d e l M S 4 0 0...
  • Page 11 DECAL H - #3002 DECAL M - #VB107 DECAL J - #SW405 DECAL K – YELLOW SIDE REFLECTOR #PM17-5910 DECAL L – RED REAR REFLECTOR DECAL N - #VB106 #PM17-5915 M o d e l M S 4 0 0 11 | P a g e...
  • Page 12 DECAL O - #SB01 DECAL P - #SB03 DECAL R - #SB02 CAUTION IF ANY SAFETY SIGN BECOMES UNREADABLE FOR ANY REASON, THE SIGN MUST BE REPLACED WITH A NEW SIGN. IF THE SPREADER IS REPAINTED, ALL SAFETY SIGNS MUST BE REPLACED. CONTACT YOUR DEALER OR MEYER’S EQUIPMENT MANUFACTURING CORP.

  • Page 13: Manure Spreader Safety

    MANURE SPREADER SAFETY CAUTION THERE ARE INHERENT HAZARDS ASSOCIATED WITH THE OPERATION OF A MANURE SPREADER. FOR YOUR SAFETY: • Never Enter Spreader Box While In Operation For Any Reason. • Only Properly Instructed People Should Operate The Spreader. Do Not Allow Children Or Inexperienced Persons To Operate The Spreader.

  • Page 14: Mandatory Safety Shutdown Procedure

    MANDATORY SAFETY SHUTDOWN PROCEDURE BEFORE unclogging, cleaning, adjusting, lubricating or servicing the unit: 1. Disengage the tractor PTO. 2. Shut off the tractor engine, remove the ignition key and take it with you. 3. Wait for all movement to stop. 4.

  • Page 15: Pressurized Hydraulic Fluid And Equipment Safety

    PRESSURIZED HYDRAULIC FLUID AND EQUIPMENT SAFETY • Only adequately trained and qualified persons should work on hydraulic systems. You may be severely injured or killed by being crushed under a falling piece of equipment. Always have transport locks in place and frame sufficiently blocked when working on any implement. •...

  • Page 16: Pre-Operation

    PRE-OPERATION GENERAL Read the entire Owner’s Manual before attempting to operate this manure spreader. Before attempting any maintenance or repairs; always be sure all rotating parts have stopped and that the tractor is shut off. Disconnect the PTO, relieve all hydraulic pressure and disconnect hydraulic hoses. WARNING NEVER OPERATE SPREADER WITH ANY GUARDS OR SHIELDS REMOVED.

  • Page 17: Tractor Towing Size Requirements

    Empty Weight + Load Weight = Gross Weight Minimum Tractor Weight Spreader Gross Weight x (2/3) = Min Tractor Weight LOAD TYPE CAPACITY EXAMPLE (MS400) MS400 A struck level load of semi-solid manure: Load Weight = 400 x 60 = 24,000 LBS Struck Level...

  • Page 18: Tractor/Trailer Plug Wiring

    TRACTOR/TRAILER PLUG WIRING The spreader is designed to work with a standard 7-Way, Round Pin Plug. For all lights and accessories to work correctly, ensure that your tractor is wired as illustrated. 1- GROUND 2- FLOOD LIGHTS 3- LEFT TURN SIGNAL / HAZARD 4- BRAKE LIGHTS 5- RIGHT TURN SIGNAL / HAZARD 6- TAIL / RUNNING LIGHTS...

  • Page 19: Open And Closed Center Hydraulic Systems

    Open and Closed Center Hydraulic Systems • Most late model tractors use a Closed Center hydraulic system with a variable displacement pump which only pumps oil as required. This system is commonly CCLS (Closed Center Load Sensing), also known as PFC (Pressure and Flow Compensated). The ball valve on the spreader should be closed. •...

  • Page 20: Operation

    OPERATION DANGER CAUTION NEVER ENTER THE SPREADER BOX FOR ANY DO NOT USE JACK EXCEPT WHEN SPREADER REASON WITHOUT FIRST DISCONNECTING IS EMPTY. JACK WILL NOT SUPPORT ADDED PTO SHAFT FROM TRACTOR. DO NOT ALLOW WEIGHT FROM LOAD. UNBALANCED WEIGHT MAY RESULT IN UNEXPECTED “TIP UP”...

  • Page 21: Transporting

    TRANSPORTING WARNING CAUTION DO NOT TOW AT SPEEDS GREATER THAN 20 REGULARLY CLEAN OFF THE REFLECTIVE TAPE MPH. FAILURE TO HEED MAY RESULT IN AT THE REAR AND SIDES OF THE SPREADER WHEN TRANSPORTING IT ON THE HIGHWAY. SERIOUS PERSONAL INJURY OR DEATH. While towing the spreader, check for traffic constantly.

  • Page 22: Unloading

    UNLOADING The rear beaters have been designed and to provide the best spread pattern for most liquids and semi-solid manure. However, the pattern will vary for each specific condition. The factors that contribute most to differing patterns will be moisture content and the amount and length of bedding material. For most typical conditions, the spread pattern should be uniform and about 40 ft wide or more.

  • Page 23: Beater Overload

    Beater Overload In the event the beater drive becomes overloaded (such as with a clog), the clutch on the rear drive assembly will automatically disengage, causing loss of power to the beaters and an audible clattering noise. If this happens, perform the following: 1.

  • Page 24: Hydraulic Apron, Speed Control Options

    Hydraulic Apron, Speed Control Options Standard Flow Control: The standard system utilizes the tractor’s flow control. This system requires that the tractor have an adjustable flow control lever or knob. There is no adjustable flow control valve on the spreader with this option. However, the valve on the spreader regulates and limits the flow to the hydraulic motor.

  • Page 25: Maintenance, Adjustments, & Lubrication

    MAINTENANCE, ADJUSTMENTS, & LUBRICATION WHEEL & TIRE MAINTENANCE WHEELS: Check after first hour of towing and periodically thereafter. The wheel studs should be torqued to 297 foot pounds in a crisscross pattern. TIRE PRESSURES: 1600R20 Recommended Pressure: 75 PSI 600/55 x 26.5 Recommended Pressure: 50 PSI Wheel Hub Lubrication Remove the wheels and hubs annually.

  • Page 26: Lubrication

    LUBRICATION MODEL MS400 SHOWN 26 | P a g e M o d e l M S 4 0 0...

  • Page 27: Main Spreader Assembly

    Lube. Change Oil Every 2 Years With Regular Usage. Grease Drive Shaft Bearings Under Spreader Box, One Pump Every 8 Hours. MS400- 4 Locations, MS485-5 Locations. 3-4 Bearings Under The Box Accessed By Grease Lines In Front Of Axle On RH Side Of Spreader, 1 Bearing In Front Of Spreader Under The PTO Guard.

  • Page 28: Adjustments

    ADJUSTMENTS - INSPECT APRON TENSION DAILY!! FAILURE TO KEEP THE APRON PROPERLY TENSIONED WILL RESULT IN POOR PERFORMANCE AND EXCESSIVE CHAIN SAG, CAUSING SEVERE DAMAGE TO THE APRON AND BEATER ASSEMBLY. A. The standard tensioner system is adjusted by (4) bolts located at the front of the spreader. Turn the bolts to pull the tensioner blocks forward and remove all slack.

  • Page 29: Beater Attachment Maintenance

    BEATER ATTACHMENT MAINTENANCE Vertical Beater Attachment Grease Top Bearings of Vertical Beater Head, Both Sides By Remote Grease Lines. 1 Pump Every 8 Hours. Maintain Oil Level In Vertical Beater Gearbox To Sight Gauge Level. It Holds 18.5 Quarts. When Required, Refill With SAE 85-140 Moly Fortified Gear Lube Or Synthetic SAE 75-90 Gear Lube.

  • Page 30: Combination Beater Attachment

    Combination Beater Attachment Grease Horizontal Beater Bearings On RH Side Of Attachment. 1 Pump Every 8 Hours. Maintain Oil Level In Bottom Gearbox To Sight Gauge Level. When Required, Refill With SAE 85-140 Moly Fortified Gear Lube Or Synthetic SAE 75-90 Gear Lube. Replace Oil Every 2 Years With Regular Usage. Maintain Oil Level In The (2) Side Gearboxes To Sight Gauge Level.

  • Page 31: Beater Timing

    Beater Timing Refer to the illustrations below for correct orientation of the beaters when installing. VERTICAL BEATER ATTACHMENT REAR VIEW VERTICAL BEATER ATTACHMENT TOP VIEW COMBO BEATER ATTACHMENT HORIZONTAL BEATERS REAR VIEW COMBO BEATER ATTACHMENT BOTTOM SPINNERS TOP VIEW 45° M o d e l M S 4 0 0 31 | P a g e...

  • Page 32: Replacement Parts

    REPLACEMENT PARTS BOX PARTS, SHIELDS, & MISC. MODEL MS400 SHOWN 32 | P a g e M o d e l M S 4 0 0...
  • Page 33 BOX PARTS, SHIELDS, & MISC. PART NO. QTY. DESCRIPTION E01273 HINGE, FRT CASE DOOR, 20”L E21658 PTO STAND w/ RUBBER STRAP, 10”L E31149 BEATER BRACKET CROSS BEAM E31199 ROCK GUARD ASSEMBLY E31278 HOSE/ACCESSORY BRACKET E30326 GAS SPRING (DOOR LIFT) E00003 BELTING BAR, 1-1/4”...

  • Page 34: Hydraulic End Gate & Related Parts

    HYDRAULIC END GATE & RELATED PARTS 34 | P a g e M o d e l M S 4 0 0...
  • Page 35 HYDRAULIC END GATE & RELATED PARTS PART NO. QTY. DESCRIPTION E31196L GATE PANEL, LH HALF E31196R GATE PANEL, RH HALF E31197 GATE PANEL SPLICE w/ WELDED NUTS E31131 FRAME WELDMENT, METER GATE E31128R SLIDER TUBE WELDMENT, 60”, RH SIDE E31128L SLIDER TUBE WELDMENT, 60”, LH SIDE E31243R GATE CHANNEL INSERT, POLY, RH w/ SENSOR HOLES...

  • Page 36: Axles & Related Parts, Standard

    AXLES & RELATED PARTS, STANDARD RH SIDE SHOWN LH SIDE IDENTICAL 36 | P a g e M o d e l M S 4 0 0...
  • Page 37 AXLES & RELATED PARTS, STANDARD NOTE: QUANTITIES INCLUDE BOTH LEFT & RIGHT SIDES PART NO. QTY. DESCRIPTION E20528 AXLE ARM ASSEMBLY, Ø3-1/8” SPINDLES E00171 SPINDLE, Ø3-1/8” X 20-1/2”, FOR G871 HUB E00172 SEAL, HUB, G906497 E00173 INNER BEARING, 39585, G910333 E00174 INNER CUP, 39520, G910331 E00176...

  • Page 38: Axles & Related Parts, Optional Flotation

    AXLES & RELATED PARTS, OPTIONAL FLOTATION RH SIDE SHOWN LH SIDE IDENTICAL 38 | P a g e M o d e l M S 4 0 0...
  • Page 39 AXLES & RELATED PARTS, OPTIONAL FLOTATION NOTE: QUANTITIES INCLUDE BOTH LEFT & RIGHT SIDES PART NO. QTY. DESCRIPTION E00170-VB AXLE ARM ASSEMBLY, Ø3-3/8” SPINDLES VB-00148 SPINDLE, Ø3-3/8” x 23-3/4”, FOR 600/55 x 26.5 FLOTATION TIRE E00172-VB SEAL, HUB, G946275 E00173-VB INNER BEARING, 33275, G910398 E00174-VB INNER CUP, 33462, G910397...

  • Page 40: Beater Driveline & Related Parts

    BEATER DRIVELINE & RELATED PARTS MODEL MS400 SHOWN 40 | P a g e M o d e l M S 4 0 0...
  • Page 41 BEATER DRIVELINE & RELATED PARTS PART NO. QTY. DESCRIPTION PTO SHAFT ASSEMBLY, Ø1-3/8”-21 SPLINE, FRONT w/ CV 245-25785 (See Separate Listing(s) For Detailed Parts) PTO SHAFT ASSEMBLY, Ø1-3/4”-6 SPLINE, REAR w/ CLUTCH 242-25787 (See Separate Listing(s) For Detailed Parts) E31105-235 DRIVE SHAFT, Ø1-3/4”-6 SPLINE, 184”...

  • Page 42: Vertical Beater Attachment

    VERTICAL BEATER ATTACHMENT 42 | P a g e M o d e l M S 4 0 0...
  • Page 43 VERTICAL BEATER ATTACHMENT PART NO. QTY. DESCRIPTION VERTICAL BEATER HEAD, COMPLETE, SRT12/2000 19340 (See Separate Listing(s) For Detailed Parts) E30067-L ROCK WING, LH SIDE E30067-R ROCK WING, RH SIDE E31281L VB ADAPTER BRACKET, LH E31281R VB ADAPTER BRACKET, RH VB-00132 BELT DEFLECTOR, 12”...

  • Page 44: Vertical Beater Head Assembly

    VERTICAL BEATER HEAD ASSEMBLY SIDE SIDE 44 | P a g e M o d e l M S 4 0 0...
  • Page 45 VERTICAL BEATER HEAD ASSEMBLY PART NO. QTY. DESCRIPTION REF# GEAR BOX, SRT12 VB-00073 10760 (See Separate Listing(s) For Detailed Parts) VB-00074 RIGHT PANEL 14152 VB-00075 LEFT PANEL 14153 VB-00078 CROSS BAR 14247 VB-00079 UCFC 208 Ø40 BEARING 9905 VB-00080 BOLT, HEX-HD M14X40 3311 VB-00081 BOLT, HEX-HD M18X45...

  • Page 46: Vertical Beater Gearbox

    VERTICAL BEATER GEARBOX 46 | P a g e M o d e l M S 4 0 0...
  • Page 47 VERTICAL BEATER GEARBOX PART NO. QTY. DESCRIPTION REF# VB-00090 HOUSING 9126 VB-00091 9127 VB-00092 GASKET 9133 VB-00093 BEARING 32209 1259 VB-00094 SHAFT 9053 VB-00095 THREADED RING 9137 VB-00096 WASHER 9011 VB-00097 OIL SEAL 55/85/10 7480 VB-00098 RIGHT HOUSING 9646 VB-00099 GASKET 9135 VB-00100...

  • Page 48: Vertical Beater Lubrication Kit

    VERTICAL BEATER LUBRICATION KIT 48 | P a g e M o d e l M S 4 0 0...
  • Page 49 VERTICAL BEATER LUBRICATION KIT PART NO. QTY. DESCRIPTION 9879 COPPER PLATED STEEL PIPE 9587 PIPE CLIP 9586 RIVET, Ø3.5X8 9578 FITTING 9579 COMPRESSION CONE 9582 TERMINAL, M6X1 9583 TERMINAL, Ø1/8” GAS 9581 LUBRICATION BLOCK 3414 GREASE FITTING, MB10 M o d e l M S 4 0 0 49 | P a g e...

  • Page 50: Combination Beater Attachment

    COMBINATION BEATER ATTACHMENT 50 | P a g e M o d e l M S 4 0 0...
  • Page 51 COMBINATION BEATER ATTACHMENT PART NO. QTY. DESCRIPTION COMBINATION BEATER HEAD, COMPLETE, SRT18/2000 19600 (See Separate Listing(s) For Detailed Parts) HOOD ASSEMBLY, COMPLETE E31200A (Includes Items 3 & 4) E00005-09 BELTING, 12” x 79-1/4” E00003 BELTING BAR, 1-1/4” x 78” BH211301 HYDRAULIC CYLINDER, COMPLETE, Ø2”...

  • Page 52: Combination Beater Head Assembly

    COMBINATION BEATER HEAD ASSEMBLY 52 | P a g e M o d e l M S 4 0 0...
  • Page 53 COMBINATION BEATER HEAD ASSEMBLY PART NO. QTY. DESCRIPTION GEARBOX ASSEMBLY, COMPLETE, SRT18/2000 18682 (See Separate Listing) GEARBOX ASSEMBLY, COMPLETE, I=570 18610 (See Separate Listing) 18589M LEFT PANEL ASSEMBLY 18587-FP FILL PLATE, LH PANEL 18587-BS BOLT STRIP, LH PANEL 18686M TOP PANEL ASSEMBLY 18588M RIGHT PANEL ASSEMBLY 18689...

  • Page 54: Combination Beater Gearbox, Bottom

    COMBINATION BEATER GEARBOX, BOTTOM 54 | P a g e M o d e l M S 4 0 0...
  • Page 55 COMBINATION BEATER GEARBOX, BOTTOM KEY PART NO. QTY. DESCRIPTION REF 18682 GEARBOX ASSEMBLY, COMPLETE, SRT18/2000 9126 HOUSING 12624 LATERAL HOUSING 9137 LEFT THREADED RING 9011 WASHER 9631 BEVEL PINION Z=18 1259 BEARING 32209 1531 BEARING 6311 9052 GEAR Z=22 3430 CIRCLIP E 55 9650 SHAFT L=830...

  • Page 56: Combination Beater Gearbox, Lh Side

    COMBINATION BEATER GEARBOX, LH SIDE 56 | P a g e M o d e l M S 4 0 0...
  • Page 57 COMBINATION BEATER GEARBOX, LH SIDE PART NO. QTY. DESCRIPTION 18610 LATERAL GEARBOX ASSEMBLY, COMPLETE, I=570 16832 HOUSING 3428 CIRCLIP E 50 16417 GEAR Z=22 7749 BEARING 6310-2RS 4152 OIL SEAL 50/90/10 18611 SHAFT 3430 CIRCLIP E 55 9632 GEAR Z=22 1531 BEARING 6311 8889...

  • Page 58: Combination Beater Driveshaft Assembly W/ Shear Hub

    COMBINATION BEATER DRIVESHAFT ASSEMBLY w/ SHEAR HUB 58 | P a g e M o d e l M S 4 0 0...
  • Page 59 COMBINATION BEATER DRIVESHAFT ASSEMBLY w/ SHEAR HUB PART NO. QTY. DESCRIPTION BIN-0800804S64 YOKE BIN-08208 CROSS JOURNAL ASS. BIN-081608058 YOKE WITH BUSH BIN-08420400230 SPLINED MALE BIN-098701065 FLEXIBLE PIN BIN-08080016 INNER TUBE YOKE BIN-08808A64 SHEAR BOLT LB8 1 3/4" Z6 BIN-021908C001 CONE SHIELD BELL 07-08 BIN-025508C001 OUTER BEARING BIN-025408C001...

  • Page 60: Apron & Related Parts, 667Xh Pintle & 88W Pintle

    APRON & RELATED PARTS, 667XH PINTLE & 88W PINTLE STANDARD 667XH CONFIGURATION SHOWN BUSHING ASSEMBLIES (#1, #2) INCLUDE 2 SHAFT WASHERS (#3), ONE PER SIDE, WELDED. 60 | P a g e M o d e l M S 4 0 0...
  • Page 61 APRON & RELATED PARTS, 667XH PINTLE & 88W PINTLE QTY. QTY. PART NO. DESCRIPTION 667XH E00234-11P BUSHING ASSEMBLY, Ø2-3/8” SHAFT, OUTER L/R E20737-11 BUSHING ASSEMBLY, Ø2-3/8” SHAFT, CENTER L/R 3465-VB750-34 SHAFT WASHER, Ø2-3/8” 60102 GREASE ZERK, 1/8 NPT 66270 GREASE COUPLING, 1/8 NPT 66408 PIPE NIPPLE, 1/8 NPT x 5”L SCH40 BLK E00236-11...

  • Page 62: Apron Tensioners, Standard

    APRON TENSIONERS, STANDARD NOTE: QUANTITIES INCLUDE ONE SIDE ONLY (AS ILLUSTRATED) PART NO. QTY. DESCRIPTION HEX NUT, Ø3/4”-10, NYLOCK E02034 APRON IDLER, UHMW PLASTIC, Ø4-1/2” E31127 TENSIONER BLOCK, STANDARD E31206 ROLLER, UHMW PLASTIC, Ø3-1/2” E31238 GUIDE PLATE, ROUND E31239 TENSIONER BLOCK GUIDE E31240 TENSIONER SHAFT, Ø2”, STANDARD E31289...

  • Page 63: Apron Tensioners, Optional Automatic

    APRON TENSIONERS, OPTIONAL AUTOMATIC QUANTITIES INCLUDE ONE SIDE ONLY (AS ILLUSTRATED) PART NO. QTY. DESCRIPTION E31126-AS AUTO TENSIONER BLOCK ASSEMBLY w/ BUSHINGS E31329 PLASTIC BUSHING, PRESS-FIT, REF# MFI-1216-24 E31321 TENSIONER GUIDE ROD, WELDMENT E02034 APRON IDLER, UHMW PLASTIC, Ø4-1/2” E31206 ROLLER, UHMW PLASTIC, Ø3-1/2”...

  • Page 64: Apron Drive Gearbox, Rt500

    APRON DRIVE GEARBOX, RT500 64 | P a g e M o d e l M S 4 0 0...
  • Page 65 APRON DRIVE GEARBOX, RT500 KEY PART NO. QTY. DESCRIPTION REF# VB-00061 COMPLETE GEARBOX, RT500 15410 VB-00032 HOUSING 8979 VB-00033-11 HUB 2.375" BORE 15414 VB-00034 CIRCLIP E 95 9066 VB-00035 GEAR Z=54 8996 VB-00036 BEARING 6017 9067 VB-00037 CIRCLIP I 130 9069 VB-00038 PINION Z=12...

  • Page 66: Front Pto Driveshaft Assembly W/ Cv, Tractor To Trailer

    FRONT PTO DRIVESHAFT ASSEMBLY w/ CV, TRACTOR TO TRAILER Standard Ø1-3/8 – 21 SPLINE and Optional Ø1-3/4 – 20 SPLINE PART NO. DESCRIPTION REF# 1 3/8-21 1 3/4-20 E00475-10 JOINT & SHAFT HALF ASM W/GUARD 93-25052 E00471-10 JOINT & SHAFT HALF ASM W/GUARD 93-25050 E00476-11 JOINT &...

  • Page 67: Rear Driveshaft Assembly W/ Over-Running Auto Clutch

    REAR DRIVESHAFT ASSEMBLY w/ OVER-RUNNING AUTO CLUTCH BEATER END PART NO. DESCRIPTION 93-25787 JOINT & SHAFT HALF ASM. W/GUARD 95-25787 JOINT & SHAFT HALF ASM. 92-25787 JOINT & TUBE HALF ASM W/GUARD 94-25787 JOINT & TUBE HALF ASM. YOKE & OVER-RUNNING CLUTCH HUB ASM. 38-20044 (See Separate Listing(s) For Detailed Parts) 03-15287...

  • Page 68: Yoke & Over-Running Clutch Hub Assembly

    YOKE & OVER-RUNNING CLUTCH HUB ASSEMBLY PART NO. QTY. DESCRIPTION 35301-1005 YOKE 23-15057 WAVE SPRING 38-30077 OVERRUNNING INNER HUB 11-15081 SETSCREW 12-11018 BALL, Ø.250 11-15136 WASHER 24-15133 RETAINING RING 06-13492 HUB CLAMP ASSEMBLY 80401-1000 OVERRUNNING HUB 11-15134 OVERRUNNING KEY 23-15056 LEAF SPRING 38-20044 YOKE &...

  • Page 69: Automatic Cutout Clutch Assembly

    AUTOMATIC CUTOUT CLUTCH ASSEMBLY PART NO. QTY. DESCRIPTION 11-15173 BOLT, M10 x 1.50 x 18MM LG CL10.9 80461-1000 HOUSING 80661-1005 DRIVER 11-15445 DRIVE WEDGE 06-15572 WEDGE RING 23-15066 SPRING 11-15407 O-RING 20-15157 COMPRESSION PLATE 24-15143 RETAINING RING 11-15288 O-RING 24-15144 RETAINING RING 38-52113 CLUTCH PACK, COMPLETE...

  • Page 70: Hitch Parts, Standard

    HITCH PARTS, STANDARD (FOR SCALE KIT HITCHES, SEE SCALE KIT PARTS) PART NO. DESCRIPTION E31152 HITCH MOUNT WELDMENT, BOLT-ON ARTICULATING HITCH, REF# BPF-CAT4 E30381 (Requires Drawbar Hammer Strap) (Ø1-1/2” Pin or Ø2” Pin w/ Insert Removed) HITCH ASSEMBLY, COMPLETE E31286 (Clevis Style w/ Swivel For Standard Drawbar) (Ø1-1/2”...

  • Page 71: Highway Lighting & Wiring

    HIGHWAY LIGHTING & WIRING VIEWED FROM REAR WIRE COLOR FUNCTION PIN # WHITE GROUND BROWN TAIL LIGHTS BRAKE LIGHTS RIGHT TURN GREEN & HAZARD LEFT TURN YELLOW & HAZARD PART NO. QTY. DESCRIPTION E30534 LIGHT MOUNT BEAM, 19-1/2”L E30531R LIGHT BRACKET ADAPTER MOUNT, RH E30531L LIGHT BRACKET ADAPTER MOUNT, LH 318L-P...

  • Page 72: Optional Flood Lighting & Wiring

    OPTIONAL FLOOD LIGHTING & WIRING FRONT BOX LIGHT (MOUNTED TO ROCK GUARD) PART NO. QTY. DESCRIPTION E31262 LED FLOOD LIGHT w/ MOUNT & MALE PLUG, REF# 903-MV E31262M HANGER BRACKET, REAR FLOOD LIGHTS E31330-12 CABLE, 2-WIRE w/ FEMALE PLUG, 12’ E31330-30 CABLE, 2-WIRE w/ FEMALE PLUG, 30’...

  • Page 73: Optional Gate Height Indicator System

    OPTIONAL GATE HEIGHT INDICATOR SYSTEM PART NO. QTY. DESCRIPTION E31103-RM-4C PCB RELAY MODULE, COMPLETE E31070 LED LIGHT, RED/GREEN, S22DLGRXPQ E31083B PROXIMITY SENSOR, PNK-AP-3H (PNP / NO) E31115-BB WIRING HARNESS B, PCB to LEDs E31115-AB WIRING HARNESS A, PCB to Sensors + Power E31205 ACCESSORY SUBPANEL, FRONT CASE E31348...

  • Page 74: Optional Weight Scale Kit Parts

    OPTIONAL WEIGHT SCALE KIT PARTS NT8000 RATE CONTROLLER COMPONENTS NT8000 OPTION REPLACES ITEMS 13,14, & 19. SEE PARTS LIST FOR REPLACEMENT CABLES. 74 | P a g e M o d e l M S 4 0 0...
  • Page 75 OPTIONAL WEIGHT SCALE KIT PARTS PART NO. QTY. DESCRIPTION E31332R ARM ASSEMBLY, SCALE KIT w/ 1600R20 TIRES, RH SIDE E31332R-FL ARM ASSEMBLY, SCALE KIT w/ 600/55 FLOTATION TIRES, RH SIDE E31332L ARM ASSEMBLY, SCALE KIT w/ 1600R20 TIRES, LH SIDE E31332L-FL ARM ASSEMBLY, SCALE KIT w/ 600/55 FLOTATION TIRES, LH SIDE E31335...

  • Page 76: Hydraulics, Metering End Gate

    HYDRAULICS, METERING END GATE 76 | P a g e M o d e l M S 4 0 0...
  • Page 77 HYDRAULICS, METERING END GATE PART NO. QTY. DESCRIPTION BH287248 HYDRAULIC CYLINDER, Ø2.5” BORE, Ø1.375” ROD, 60” STROKE BH286352 SEAL KIT, 2.5 BORE X 1.375 ROD 2700-LN-08-08 JIC BULKHEAD UNION w/ LOCKNUT, 08MJIC-08MJIC 2703-LN-08-08-08 JIC BULKHEAD UNION BRANCH TEE w/ LOCKNUT, 08MJIC x3 6801-08-08 JIC to O-RING ELBOW, 90°, 08MJIC-08MORB NV-08M-08FP...

  • Page 78: Hydraulics, Combination Beater Hood

    HYDRAULICS, COMBINATION BEATER HOOD 78 | P a g e M o d e l M S 4 0 0...
  • Page 79 HYDRAULICS, COMBINATION BEATER HOOD PART NO. QTY. DESCRIPTION 2700-LN-06-06 JIC BULKHEAD UNION w/ LOCKNUT, 06MJIC-06MJIC 2703-LN-06-06-06 JIC BULKHEAD UNION BRANCH TEE w/ LOCKNUT, 06MJIC x3 6400-06-08 JIC to O-RING ADAPTER, 06MJIC - 08MORB NV-08M-08FP QUICK COUPLER, MALE TIP, 1/2" FPT, ISO 5675 RST2406-06-06-R.063 RESTRICTOR, 06FJIC - 06MJIC, Ø.063 ORIFICE BH211301...

  • Page 80: Hydraulics, Optional Auto Tensioner Circuit

    HYDRAULICS, OPTIONAL AUTO TENSIONER CIRCUIT MANIFOLD PORT REFERENCE (NORMAL, UNLOAD OPERATION) PORT A (LOWER): APRON RETURN/OUT PORT B (UPPER): APRON PRESSURE/IN (FROM VALVE) PORT M1 (LOWER): TO MOTOR PORT B, RETURN/OUT PORT M2 (UPPER): TO MOTOR PORT A, PRESSURE/IN PORT T: TENSIONER CIRCUIT, PRESSURE (PORT B) (PORT A) (PORT M2)
  • Page 81 HYDRAULICS, OPTIONAL AUTO TENSIONER CIRCUIT PART NO. QTY. DESCRIPTION BH211301 HYD. CYLINDER, COMPLETE, Ø2" BORE, Ø1.125” ROD, 6” STROKE BH204010 SEAL KIT, 2.0 BORE x 1.125 ROD BH276001 ROD END CLEVIS BH172250 Ø1.00 PIN w/ R-CLIPS E31323 MANIFOLD, AUTO TENSIONER, REF# EPN-1988 0304-C-08 JIC CAP, SIZE 08 (SFC ONLY w/o BALL VALVE) 2704-LN-06-06-06...

  • Page 82: Hydraulics, Apron Drive Motor

    HYDRAULICS, APRON DRIVE MOTOR FLOW REFERENCES REFER TO NORMAL, UNLOAD OPERATION MOTOR PORT REFERENCE (NORMAL, UNLOAD OPERATION) PORT A – IN / PRESSURE LINE (FROM VALVE) PORT B – OUT / RETURN LINE 82 | P a g e M o d e l M S 4 0 0...
  • Page 83 HYDRAULICS, APRON DRIVE MOTOR PART NO. QTY. DESCRIPTION 2700-LN-08-08 JIC BULKHEAD UNION w/ LOCKNUT, 08MJIC-08MJIC 6801-08-10 JIC to O-RING ELBOW, 90°, 08MJIC-10MORB E00509-VB HYDRAULIC MOTOR, 255160A1912AEAAA HYDRAULIC MOTOR w/ SPEED SENSOR, 255160A1916AEWAA E30797-160 (WeatherPack Connector) HYDRAULIC MOTOR w/ SPEED SENSOR, 255160A1916AEXAA E30797-160-M12 (M12 Connector) HYDRAULIC HOSE, 2SC08-FJX-08-FJX45-08, 46”...

  • Page 84: Hydraulics, Apron, Standard Flow Control

    HYDRAULICS, APRON, STANDARD FLOW CONTROL FLOW REFERENCES REFER TO NORMAL, UNLOAD OPERATION (TO MOTOR) OPTIONAL TENSIONER MANIFOLD LOCATION. SEE SEPARATE LISTING FOR FITTINGS. 84 | P a g e M o d e l M S 4 0 0...
  • Page 85 HYDRAULICS, APRON, STANDARD FLOW CONTROL PART NO. QTY. DESCRIPTION 0304-C-08 JIC CAP, SIZE 08 2406-08-06 JIC REDUCER, 08FJIC-06MJIC 2700-LN-08-08 JIC BULKHEAD UNION w/ LOCKNUT, 08MJIC-08MJIC 2704-LN-08-08-08 JIC BULKHEAD UNION RUN TEE w/ LOCKNUT, 08MJIC x3 6400-08-08 JIC to O-RING ADAPTER, 08MJIC-08MORB 6400-08-12 JIC to O-RING ADAPTER, 08MJIC-12MORB 6402-08-08...

  • Page 86: Hydraulics, Apron, Electric Flow Control

    HYDRAULICS, APRON, ELECTRIC FLOW CONTROL REVERSE OPERATION VALVE BYPASS PRESSURE SIDE NORMAL, UNLOAD OPERATION (TO MOTOR) OPTIONAL TENSIONER MANIFOLD LOCATION. SEE SEPARATE LISTING FOR FITTINGS. EXCESS FLOW: PORT 2 RETURN SIDE NORMAL, UNLOAD OPERATION (TO MOTOR) OPEN CENTER SYSTEMS WITH A FIXED DISPLACEMENT PUMP, BALL VALVE OPEN. CLOSED CENTER SYSTEMS WITH A VARIABLE DISPLACEMENT PUMP, BALL VALVE CLOSED.
  • Page 87 HYDRAULICS, APRON, ELECTRIC FLOW CONTROL PART NO. QTY. DESCRIPTION E31324 VALVE, ELECTRIC FLOW CONTROL, EPFB-12 E31324-CB CONTROL BOX, PWM-1404-12 (Not Shown) E31324-WH WIRE HARNESS, POWER + VALVE COIL (Not Shown) 2700-LN-08-08 JIC BULKHEAD UNION w/ LOCKNUT, 08MJIC-08MJIC 6400-08-08 JIC to O-RING ADAPTER, 08MJIC-08MORB 6402-08-08 O-RING to JIC SWIVEL, 08MORB-08FJS 6403-NWO-12-08...

  • Page 88: Hydraulics, Apron, Manual Flow Control

    HYDRAULICS, APRON, MANUAL FLOW CONTROL PRESSURE SIDE NORMAL, UNLOAD OPERATION (TO MOTOR) OPTIONAL TENSIONER MANIFOLD LOCATION. SEE SEPARATE LISTING FOR FITTINGS. RETURN SIDE NORMAL, UNLOAD OPERATION (TO MOTOR) OPEN CENTER SYSTEMS WITH A FIXED DISPLACEMENT PUMP, BALL VALVE OPEN. CLOSED CENTER SYSTEMS WITH A VARIABLE DISPLACEMENT PUMP, BALL VALVE CLOSED. SEE PAGE 19 FOR MORE INFORMATION.
  • Page 89 HYDRAULICS, APRON, MANUAL FLOW CONTROL PART NO. QTY. DESCRIPTION E00486-00 VALVE, MANUAL FLOW CONTROL, RD-1910-16 2700-LN-08-08 JIC BULKHEAD UNION w/ LOCKNUT, 08MJIC-08MJIC 2705-08-08 JIC to PIPE BULKHEAD, 08FP-08MJIC 32L012 SPLIT COLLAR, Ø3/4” (For Twist Hose) 6400-08-08 JIC to O-RING ADAPTER, 08MJIC-08MORB 6402-08-08 O-RING to JIC SWIVEL, 08MORB-08FJS 6403-NWO-10-08...

  • Page 90: Limited Warranty Statement

    LIMITED WARRANTY STATEMENT Meyer’s Equipment Mfg. Corp. warrants each new Meyer’s E.M.C. product to be free from defects in material and workmanship. This warranty is applicable only for the normal service life expectancy of the product or components, not to exceed 12 consecutive months from the date of delivery of the new Meyer’s E.M.C.

Table of Contents