Toshiba BMS-CT2560U-E Installation Manual page 7

Central Control Device (Touch Screen Controller)
 Before Installation
Confirm that all the parts listed below are included in the package.
Included Items
No. Component name
1 System Controller
2 Power adapter
3 Owner's Manual
4 Installation Manual
5 Fixing screw
6 Fixing screw
7 Closed end connector
8 Cable tie
9 Double-sided tape
Wiring specifications
Use the following wiring material to connect signal wires and power supply wires. (Locally procured)
No. Wiring
1 For LINK terminal
2 For RS-485
3 For digital I/O
4 For Ethernet
Quantity
1
1
1
1
4 Fixing screw (M4×12) for attaching the main unit from the front
4 Fixing screw (M3×8) for attaching the main unit from the rear
2 RS-485 cable crimp connector
2 For fixing the power adapter
1 For fixing the power adapter
Wire type / wire diameter / wire length
Refer to "Design of Control Wiring" (P.13).
2-core shielded wires
2
1.25 mm , up to 500 m (total extension distance)
Two-core cable
2
0.3 mm , up to 100 m
LAN cable (category 5 or above)
Maximum length: 100 m
Installation Manual
Remarks
EN
7 -EN