Furniture of America Orbe CM4006-3PK Assembly Instructions

Download this manual

Assembly Instructions

CM4006-3PK

ASSEMBLY RATING

Tools Required for Assembly:

The Assembly Rating is a 5-point system that

Allen Wrench

shows the degree of effort needed in

(Included)

assembling a specific product (with 1 being

easy and 5 being difficult). For some

products, two persons are recommended.

DIFFICULT

EASY

Page 1 of 5

Rev.14-03-19

Need help?

Do you have a question about the Orbe CM4006-3PK and is the answer not in the manual?

Page 1 Assembly Instructions CM4006-3PK ASSEMBLY RATING Tools Required for Assembly: The Assembly Rating is a 5-point system that Allen Wrench shows the degree of effort needed in (Included) assembling a specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
Page 2 Page 2 of 5...
Page 3 Before you begin, please read Page 2 of “Assembly and Care Advice”. And remember, do not tighten until each step is completed or instructed. Parts List Hardware List #1 x 1 pc x 3 #A x 11 pcs x 3 Table Glass Bolt 1/4”x1-1/4”...
Page 4 #A x 4 pcs #B x 4 pcs #D x 4 pcs #E x 4 pcs Insert 4 wood dowels (#E) onto the bottom base (#4). Align the foot (#5) with the wood dowel (#E) and the pre-drilled hole on the corner of the bottom base (#4).
Page 5 #A x 3 pcs #B x 3 pcs #C x 3 pcs Carefully place the table top (#2) facing down on a protected surface. Align the cross support assembly with the 3 pre-drilled holes on the bottom of the table top (#2). Turn right (clockwise) to tighten Prepare 3 bolt assemblies by inserting FIRST the lock...