Page 1
LTE Tracker Prime LS100 User Manual Revision: 1.00 Document Title Prime LS100 User manual Version 1.00 Finale Date 2020-03-26 Status Released Document Control ID TRACKER Prime LS100...
2.3 LED Description ........................5 3 Getting Started ..........................6 3.1 Parts List ..........................6 3.2 Built-in Battery ........................6 3.3 Prime LS100 Adapter ......................7 3.4 Power on/Power off ......................8 4 Frequency ............................8 5 Trouble shooting and Safety info ....................9 5.1 Trouble shooting .........................
1 Introduction Prime LS100 is a powerful LTE Tracker which is designed as Emergency call equipment. It works on LTE B4/B13 with superior receiving sensitivity. Its location can be real time or schedule tracked by backend server or specified terminals. Based on the embedded wireless tracking protocol, Prime LS100 can communicate with the backend server through LTE network, and transfer reports of emergency.
Button /USB Interface Description KEY/interface Description Reset Key Power off the Prime LS100 Adapter Connected to a Power supply socket can power on Prime LS100 Function Key SOS mode Feature Key Play to do list audios. TEST Key Test mode...
2.3 LED Description Figure 1-2 There are 3 LED lights in Prime LS100 device, the description as following. Light Event State Function Key LED Function Key pressed Solid when pressed Feature Key LED Feature Key pressed Solid when pressed Test Key LED...
◆ There is a 850mAh Lithium polymer battery integrated in device. The built-in battery will only be used when the adapter unplugged. Note: If the Prime LS100 device is firstly used, please make sure the adapter of the device is plugged in the power supply socket.
3.3 Prime LS100 Adapter Prime LS100 base station is connected with an AC Adapter. The adapter is used for device power on, built-in battery charging, which should be plugged in power supply socket at any time ( by end user).
Power on: ◆ Plug in the power adapter and power on. Power off: ◆ Unplugged the power adapter and press the Reset button. Note: the user can not power off Prime LS100 if the is plugged. adapter 4 Frequency LTE: Band2/Band4/Band5/Band12/Band13...
◆ Please do not put the device on the overheating or too humid place, avoid exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. ◆ Please do not use Prime LS100 on the airplane or near medical equipment. FCC Caution. § 15.19 Labelling requirements.
Page 10
provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.