Subscribe to Our Youtube Channel
Related Manuals for Prime AT PLUS_CDMA(3G)
Summary of Contents for Prime AT PLUS_CDMA(3G)
- Page 1 CDMA/GPS Tracker AT PLUS_CDMA(3G) User Manual Revision: 1.00 Document Title AT PLUS_CDMA(3G) User manual Version 1.00 Finale Date 2016-03-11 Status Released Document Control ID TRACKER AT PLUS_CDMA(3G)
-
Page 2: Table Of Contents
Contents 1 Introduction............................3 2 Product Overview..........................3 2.1 Appearance..........................3 2.2 Buttons/12PIN Interface Description................... 3 2.3 LED Description........................4 3 Getting Started..........................5 3.1 Parts List..........................5 3.2 Battery Charging........................5 3.3 AT PLUS_CDMA(3G) Data Cable..................5 3.4 Power on/Power off......................6 4 Trouble shooting and Safety info.....................7 4.1 Trouble shooting........................ -
Page 3: Introduction
1 Introduction AT PLUS_CDMA(3G) is a powerful GPS locator which is designed for vehicle and assets tracking. With superior receiving sensitivity, fast CDMA frequencies 800/1900. Its location can be real time or schedule tracked by backend server or specified terminals. Based on the embedded wireless tracking protocol, AT PLUS_CDMA(3G) can communicate with the backend server through CDMA network, and transfer reports of emergency, Geo-fencing, device status and scheduled GPS position etc…... -
Page 4: Led Description
12PIN Connect a 3.7V Li-ion or Li-Polymer battery can power on AT interface PLUS_CDMA(3G) Backend server developer or administrator can use the data cable to configure AT PLUS_CDMA(3G) (by RD or engineer not by end user). Reset Key Click the key will turn off internal VBAT when OS is abnormal, and then press Power Key to restart AT PLUS_CDMA(3G). -
Page 5: Getting Started
3 Getting Started 3.1 Parts List Name Picture Remark The CDMA/GPS locator. PLUS_CDMA(3G ) Locater It the data cable which can be used for PLUS_CDMA(3G firmware upgrading and configuration (by ) Data and charger RD or engineer not by end user). Cable It also includes the charger interface on the AT PLUS_CDMA(3G). -
Page 6: Power On/Power Off
Figure 2-1 3.4 Power on/Power off Figure 2-2 Power on: Press the Power key at least 3 seconds and release it to power on AT PLUS_CDMA(3G) device. Note that, the will fast flash. Power LED light Power off: Press the power key about 3 seconds; Power LED light will fast flash and then turn off, which indicates that AT PLUS_CDMA(3G) device has been powered off. -
Page 7: Trouble Shooting And Safety Info
4 Trouble shooting and Safety info 4.1 Trouble shooting Trouble Possible Reason Solution Messages can’t be APN is wrong. Some Ask the network operator for the right reported to the APN can not visit the APN. backend server by internet directly. Mobile network. - Page 8 Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Need help?
Do you have a question about the AT PLUS_CDMA(3G) and is the answer not in the manual?
Questions and answers