External Control Device Setup - LG RL-JA20 Owner's Manual

External control device setup

* Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system)
and control the Projector's functions externally.
* When you connect a control(RS-232C) cable to this projector, use a control cable with a ferrite core attached.
If you do not do this, this projector will not conform to mandatory CISPR22(EN55022) standards.
SET ID
• Use this function to specify projector ID number.
1
Press the MENU button and then use
2
Press the ( ) button and then use
OK
A
Press the VOLUME
3
The adjustment range of Set ID is 1~99.
Only the projector with the specified ID number will operate from the remote control.
To exit the menu display, press the MENU button.
56
D E
/ button to select the
V Keystone 0
H Keystone 0
Zoom
Blank Image
Set ID
Lamp Time
Menu exit move
D E
/ button to select [Set ID] item.
F G
( , ) button to adjust Set ID to select the desired projector ID number.
V Keystone 0
H Keystone 0
Zoom
Blank Image
Set ID
Lamp Time
Menu prev. move
menu.
Blue
1
0 Hr
OK
Blue
1
0 Hr
select