Advertisement
3
PIECES
SNAP THE
TRANSLUCENT
WHEEL COVER
ONTO THE BACK
4
PIECES
*
CLEANING INSTRUCTIONS
To prolong the life of your new
Prevue Pet Products cage, we recommend:
→ When cleaning the cage and parts, use a
soft cloth or non-abrasive scrub pad (such
as Prevue's Cage Saver (#109) ).
→ Wash all parts with warm water and a mild
environmentally friendly, pet-safe soap.
→ Rinse thoroughly.
→ Hand dry all parts completely with a soft dry
cotton cloth before reassembling the cage.
→ Do not leave plastic parts in the sun to dry
as they may warp.
2003+98005 — 03 /20 — A4
Position the wheel close
to the base floor. Insert
the handle on the back
of the wheel through the
cage wires.
Rotate the handle 90° to
secure the wheel.
First, install the lower
platform (without the
hideaway dome). Add a
slide into the hole on the
platform.
To the upper platform, add
the slide, then center the
hideaway dome over the
raised circle and rotate it
into place with a "click".
Install the second platform
into the cage.
Catch the center of
the rooftop on the tabs
at the front and back.
Finish with catching
the roof ends on the
tabs along the side
panels.
For more wonderful cages, toys, and accessories for cats, birds, chickens, rabbits, ferrets, dogs and small animals, visit www.prevuepet.com
The end with the
extended handle loops
is hinged along the
center seam, and
offers rooftop cage
access.
Assembly completed.
Advertisement
