Advertisement
Quick Links
98 5
1
PIECES
2
PIECES
2003+98005 — 03 /20 — A4
Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
MODEL #
Hamster Haven/small
ASSEMBLY
MODEL #
2 3
Instructions online at www.prevuepet.com
Starting from the bottom, pull the extended hooked
wires of the side panel onto the back panel. The
middle wire hooks under the corresponding horizontal
wire on the back panel.
Link one complete seam together, then finish with the
remaining seam.
Set the assembled mesh into the base and
attach with the clips. Hook the base clips
onto the horizontal wire and clip it onto the
base by pushing down until it "clicks".
CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE
1 (312) 243 -3624
ONLINE www.prevuepet.com
EM IL
customerservice@prevuepet.com
DETAIL OF INSIDE BACK, LEFT CORNER
Advertisement
Related Manuals for Prevue Hendryx Hamster Haven
Summary of Contents for Prevue Hendryx Hamster Haven
- Page 1 CUSTOMER SUPPORT MODEL # Hamster Haven/small 98 5 For assistance or replacement parts, please contact Prevue Pet Products: ASSEMBLY MODEL # PHONE 1 (312) 243 -3624 ONLINE www.prevuepet.com EM IL customerservice@prevuepet.com Instructions online at www.prevuepet.com PIECES Starting from the bottom, pull the extended hooked wires of the side panel onto the back panel.
- Page 2 PIECES SNAP THE TRANSLUCENT Position the wheel close WHEEL COVER to the base floor. Insert ONTO THE BACK the handle on the back of the wheel through the cage wires. Rotate the handle 90° to secure the wheel. First, install the lower platform (without the hideaway dome).