Hawkins Classic Instruction Manual page 89

(see Picture 2). Repeat; tighten nut
securely until it stops moving. Do
not over-tighten - the threads may
break.
If you are unable to tighten the
nut, use a second spanner to hold
the retainer and tighten the nut as
follows:
5. Hold the lid handle in your right
hand and turn the lid upside down,
that is, with the underside of the lid
facing you and the top side of the lid
lying flat on the soft, folded cloth on
a table. With the left hand, position
the ring end of one spanner around
the retainer on the underside of
the lid and hold it in place with
the fingers of the left hand while
grasping the lid with the same hand
(see Picture 3).
6. Raise the lid vertically holding
the lid with your left hand with the
ring spanner in place on the retainer
(to stop its rotation when you tighten
the nut). Now the underneath of
the lid will be away from you and
the top of the lid will be facing you.
PICTURE 2
PICTURE 3
PICTURE 4
With the right hand, position the second spanner around the nut
on top of the lid at an upward angle and exert downward pressure
on the spanner (see Picture 4). Repeat; tighten nut securely by
repeating the downward strokes of the spanner until the nut stops
moving. Do not over-tighten - the threads may break.
Replacement of Plastic Handles
The subsidiary body handle
and the body handle
replaceable by unscrewing the
existing handle and screwing on
the replacement handle with a
screwdriver. For the body handle:
place the two halves of plastic
body handle on either side of
the metal bracket. Join them
together, insert studs and
tighten the screws into studs
from the opposite side.
If the subsidiary or the body
handle is difficult to unscrew,
a second person holding the
cooker body firmly while one
person turns the handle screws anti-clockwise will make it easier.
are
87