Overland Vehicle Systems Bushveld Owner's Manual & Installation Instructions

Roof top tent

Advertisement

Quick Links

Here at Overland Vehicle Systems, we strive on having the
shortest setup times for all of our RTTs. Our Bushveld
Hardshell tent is one of our easiest to install. Fully assembled
before transport, all a customer has to do is mount our tent to
their rack, secure and fully display the tent. We have provided
all the hardware and accessories needed to enjoy this tent fully.
Should you have any questions, please email
sales@overlandvehiclesystems.com or call
Customer Service at 833.226.4863
WARNING
Please make sure when installing your tent that you follow
all the installation instructions carefully to solidify proper
installation on your vehicle. Before installation, please make
sure to check with your vehicle's manufacturer for load capacity
ratings for your rack. Not all roof racks and/or aftermarket roof
bars can accommodate specific tent models

INCLUDED COMPONENTS

Be sure to check all packaging to make sure that all items
listed present. Also, be sure to check for any damages; some
shifting may have occurred during shipment. If so, please
contact Overland Vehicle Systems.
1 BUSHVELD RTT & ASSOCIATED COMPONENTS
1 TELESCOPING LADDER
2 MOUNTING RAILS

PRODUCT CONTENT

1
TENT PROP
1
USB LED LIGHT STRIP
1
13 MM WRENCH
1
WELCOME MAT
1
STAKE / HARDWARE WRAP
1
SHOE BAG WITH ZIPPER
1
LADDER BAG
1
NETTED RAFTER STORAGE
2
QUILTED MEMORY FOAM PILLOW
4
SHOE POUCHES
4
MOUNTING BRACKETS
4
END CAPS
WWW.OVERLANDVEHICLESYSTEMS.COM
Welcome to the Overland Vehicle Systems Family! Thank you for purchasing the Bushveld Hardshell
Roof Top Tent! Here at Overland Vehicle Systems, we strive to Inspire, Empower people to adventure.
We do this while creating the highest quality Overlanding Gear on the market. We pride ourselves on
being a company that only sells what we get out of ourselves. Our RTTs are developed with the most
durable materials that are 4-season ready! Everything from hardware to ripstop fabric has been looked
at and tested, so there is no guessing on the trail.
6
WINDOW RODS
10
STAKES AND POUCH
16
PARACORD
OWNERS MANUAL & INSTALLATION INSTRUCTIONS
BUSHVELD ROOF TOP TENT

COMPONENT IDENTIFICATION

TOOLS NEEDED

1 - 13 MM WRENCH

GETTING STARTED

THE TENT IS DESIGNED TO OPEN ON THE PASSENGER SIDE OF THE
VEHICLE ONLY.
1 Lift the tent onto your crossbars / Roof Rack, adjust accordingly.
You may need several people to help out with this step.
2 Insert the provided bolts into the bracket channel under the tent
according the sizing of your cross bars.
3 Have a friend lift the Bushveld while a second person slides the
piece over the crossbar so that one bolt is on each side of the bar.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bushveld and is the answer not in the manual?

Questions and answers

Summary of Contents for Overland Vehicle Systems Bushveld

  • Page 1 Welcome to the Overland Vehicle Systems Family! Thank you for purchasing the Bushveld Hardshell Roof Top Tent! Here at Overland Vehicle Systems, we strive to Inspire, Empower people to adventure. We do this while creating the highest quality Overlanding Gear on the market. We pride ourselves on being a company that only sells what we get out of ourselves.
  • Page 2 IMPORTANT: After installation, be sure to check all brackets to ensure everything is secure. Troubleshoot the tent by shaking the bushveld back and forth and possibly going for a short drive. Doing this will ensure that the tent doesn’t shift.
  • Page 3 OVERLAND VEHICLE SYSTEMS 2. Make sure the base of the ladder is level and on solid terrain. If not in a secure place move your vehicle to a more even terrain. 3、 Place the ladder at an approximate 70° angle as shown below, and make sure it is firmly planted on the ground.
  • Page 4 OVERLAND VEHICLE SYSTEMS CLOSING THE HARD SHELL WARNING: Before closing the tent, you MUST take down two locking rods on the gas struts. 1. Remove Rainfly rods from the canopy 2、 Using the ladder, push the extended tent base panel up and then push into the tent.
  • Page 5 WHAT IS COVERED Overland Vehicle Systems warrants to the original purchaser that its products are free from defects in material and workman- ship, for the term described, except as qualified below. The life of the product is determined from the date of purchase until such time as the product is no longer serviceable due to normal wear and tear.

Table of Contents