Advertisement
Quick Links
Advertisement
Related Manuals for SafeHome HTZSAFE 805A+MC
Summary of Contents for SafeHome HTZSAFE 805A+MC
- Page 1 Wireless Alarm System User Manual...
-
Page 2: Configuration List
1. Configuration List Plug-in Alarm Receiver 1 piece 1 piece includes 2 pieces Wireless Door/Window Sensor AAA 1.5V batteries Installation Accessories 1 set (double side tape) Manual 1 piece Note:The alarm system has been programmed already, please operate the system according to the part 3 of the manual;... - Page 3 Speaker Speaker:sound for several seconds when the sensor be activated Wireless Door/Window Sensor Indicator Light Magnet Sensor’s Body Sensor’s Body: emit the alarm signal,door/window opening detected through the separation of the sensor’s body and the magnet. Magnet: a part of the door/window sensor,work with the sensor’s body.
- Page 4 Reed Switch Battery Compartment Reed Switch:will be activated by separating the sensor’s body and the magnet Battery Compartment: 2 pieces AAA 1.5V batteries( included) 3. Operation Instructions Step 1 Plug the receiver into a outlet The indicator light of the receiver will flash for 15 seconds means working properly Step2...
- Page 5 Step 3 Press “Melody” once to choose the melody for this sensor, total 35 melodies optional. Melody Step 4 Installation(wireless door/window sensor)
-
Page 6: Other Settings
Note: the gap between the sensor's body and the magnet is maximum 8mm max. 8mm How to replace the batteries (1)pry open the back cover by a screwdriver (2)replace the batteries(2pcs AAA 1.5V batteries,please note the anode and cathode) (3)put the back cover at the correct position (as the picture), and then push it back. - Page 7 Step 2 Press and hold the “Volume” button for 5 seconds and release the button when you heard a beep prompt and the indicator light flashing; flashing slowly light up Volume Volume press and hold the Volume button release the button for 5 seconds Step 3 Activate the sensor...
- Page 8 (1)If the extra wireless door/window sensor, please activate the sensor as below: flashing quickly (a ring tone prompt and the separate the sensor’s body and indicator light flashing quickly the magnet, the indicator light means the sensor has been added flashing once means the sensor to the wireless alarm receiver was activated properly)
- Page 9 Step 5 Press”Melody”button to choose the melody for this sensor. total 35 melodies optional. (2)How to delete the sensors of the receiver Step 1 Plug the receiver into a outlet Step 2 Press and hold both the “Volume” button and “Melody” button for 10 secondsand release the buttons when you heard a long beep prompt;...
- Page 10 Step 2 Press the “Volume” once to adjust the volume of the receiver. (total 4 volume levels adjustable) Volume (4)How to change the melody for the sensors (total 35 melodies optional,match different melody with different sensor) Step 1 Plug the receiver into a outlet Step 2 Activate the sensor first,and then press the “Melody”...
-
Page 11: Technical Parameters
5. Technical Parameters Plug-in Alarm Receiver 34mm 86mm 80mm 48mm Technical parameters Item Technical Parameters Working Voltage AC 110V-220V Static Current 20mA; Alarming Current 300mA Working Current Wireless Frequency 433MHz FSK+FHSS... - Page 12 Wireless Door/Window Sensor 90mm 84mm 29mm 15mm 9mm 11mm Technical parameters Item Technical Parameters Wireless Transmission Range 600Feet Wireless Frequency 433MHz FSK+FHSS Working Voltage 3.0V Battery Type 2PCS AAA 1.5V Battery < < Working Current Static 0.1 ; Alarming 60mA -10℃...