Advertisement
Mounting:
In order to mount the Atlas to your boat, you will need to attach the included
Atlas Mount to the boat. The mount can be attached directly to a mast track,
bulkhead, or any flat surface using the two provided 6-32 screws or by running
a velcro strap through the hole in the side. The mount can be installed in
either orientation, with the release tab facing up or down. Be sure that the
release tab will be accessible with the Atlas installed—pulling this tab is the
only way to remove the Atlas from the mount.
To attach the Atlas to the mount, first hook the solid end of the mount into one
of the slots on the back of the Atlas, then push the Atlas towards the
Advertisement
