Defrost; Disconnecting The Appliance; User Notifications - Galanz GLR12BS2E08 Instruction Manual

INSTRUCTION FOR USAGE

DEFROST

Defrost of refrigerator will be executed automatically during
product running, so it is no requirement for manual defrost.
The defrost water flows into the vaporization plate and will be
vaporized by the heat of compressor. So its drain tube must be
cleaned.
Do not use mechanical devices or other
means to accelerate the defrosting process,
Warning
other than those recommended by the
manufacturer.

DISCONNECTING THE APPLIANCE

After power failure, even in summer, the refrigerator can store
food normally in several hours.
1.
Discontinuation during power failure
After power failure, do not put additional food in the appliance
and reduce the frequency of door opening. Make several ices in a
container if knowing the power failure beforehand, and put it in the
top of the fridge.
2. Discontinuation during vacation
Please fetch out the easy-rot food and the food in fridge
before shot vacation. After confirmation, close the door firmly.
If have a long vacation, please fetch out all the food and cut off
the power. After defrosting, clean up the liner of the appliance
and wipeit dry, and leave the door open.
3. Stop using
If the refrigerator may be stopped using for a long time, please
unplug the outlet and clean up the appliance. The door should
be kept open in order to prevent unpleasant smell caused by
food leavings.
In a general condition, do not stop the appliance
in case of affecting its life. After unplugging the
Attention
power, please leave at least 5 minutes before
resumption.

USER NOTIFICATIONS

1. Do not splash water on the refrigerator, as it will cause oxidation
and malfunction. Electronic component such as on/off button
should be wiped dryly.
2. Cleansers such as soap powder, abrasive cleaning powder, alkali
cleansers, chemical cloth, thinner, alcohol, acid petroleum
productand hot water should not be used to clean the
refrigerator as they may damage the painted cover and plastics.
3. Smear can damage the interior plastic component, so wipe it as
soon as possible.
4.
Please check the points below after maintenance:
(1) Is there any damage or loss of the electronic wire ?
(2) Can the plug be put in the socket reliably and smoothly?
(3) Is the plug heating unconventionally?
Please get rid of the gasket of the door
before the disposal. The disposed
apparatus should be handled by
Warning
professional staff, as it may be harmful
to the environment.
9