Manage Network Access Control Lists - NETGEAR Orbi RBR860 User Manual

6. Select an access rule:
• Allow all new devices to connect. With this setting, if you buy a new device, it
can access your network. You don't need to enter its MAC address on this page.
We recommend that you leave this radio button selected.
• Block all new devices from connecting. With this setting, if you buy a new
device, before it can access your network, you must enter its MAC address for
an Ethernet connection and its MAC address for a WiFi connection in the allowed
list.
The access rule does not affect previously blocked or allowed devices. It applies
only to devices joining your network in the future after you apply these settings.
7. To allow the computer or device you're currently using to continue to access the
network, select the check box next to your computer or device, and click the Allow
button.
8. To view a list of allowed or blocked devices that are not connected, click one of the
following links:
• View list of allowed devices not currently connected to the network
• View list of blocked devices not currently connected to the network
The list displays.
9. Click the Apply button.
Your settings are saved.

Manage network access control lists

If you did not enable NETGEAR Smart Parental Controls (SPC) in the Orbi app, you can
use the router web interface to manage network access control lists (ACLs) to block or
allow access of devices to your network.
To manage devices that are allowed or blocked:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
Control Access to the Internet
Orbi Whole Home Tri-Band Mesh WiFi 6 System
44 User Manual