Advertisement
1. Attach the two engine adjusting bolts 1 to
the frame COMP. temporarily.
2. Fit the engine installation position to the
frame COMP and attach the bolts 2 and 3
temporarily.
3. Attach the bolt 4 temporarily.
4. Attach the engine mount boss 5 and 6 to
the frame COMP. temporarily and then
attach the bolt 7 temporarily.
5. Tighten the two engine adjusting bolts 1 at
Check that the bearing surface of the bolts
torque. Tighten the nut 8 (lower side) at
TIP
For information about tightening torque
and requirement for lubricant agent, see
the list of tightening torque.
– 87 –
Advertisement
