Table of Contents
Advertisement
8.4
8.4
WARNING
Clearance A [mm]
CAUTION
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Axial clearance
Axial clearance
Physical hazards due to sharp edges on compressor wheel
The compressor wheel has sharp edges which can result in injury.
Wear safety gloves.
Wear safety gloves against mechanical risks.
The axial clearance (A) must be measured before removing and after
fitting the cartridge group.
Measure and note the axial clearance (A).
Clearances out of tolerance
Clearances out of tolerance and excessively worn components can be
the cause of serious damage to machinery and property.
Have components assessed and, if necessary, replaced by an ABB
Turbocharging Service Station.
Operation Manual / TPL65VA32/33
8
8.4
TPL65VA32/33
0.31 ... 0.49
Page 91
Advertisement
Table of Contents
