Table of Contents
Advertisement
Installing the monitor driver in Windows 11
To use the Plug and Play feature in Microsoft Windows 11, do the following:
1�
Turn off the computer and all attached devices�
2� Ensure that the monitor is connected correctly�
3�
Turn on the monitor and then the system unit� Allow your computer to start the Windows 11
operating system�
4�
From the Lenovo website https://pcsupport�lenovo�com/solutions/y27q_30, find the
corresponding monitor driver and download it to a PC to which this monitor is connected
(such as a desktop)�
On the Desktop, move the mouse to the bottom-right corner of the screen, choose Setting,
5�
double click Control Panel, then double click the icon of Hardware and Sound, and then
click Device Manager�
6�
Click the Monitor tab�
7�
Click the Properties button�
Click the Driver tab�
8�
Click Update Driver, then click Browse the computer to find the driver program�
9�
10� Select Pick from the list of device driver program on the computer�
11� Click the Hard Disk button� By clicking the Browse button and navigate to the directory that
you put your download drivers in�
12� Select the "Y27q-30.inf" file and click the Open button� Click the OK button�
13� In the new window, select Lenovo Y27q-30, and click Next�
14� After the installation is completed, delete all downloaded files and close all windows�
15� Restart the system� The system will automatically select the maximum refresh rate and
navigate to the following directory corresponding Color Matching Profiles�
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality�
Lenovo recommends using either 2560 × 1440 at a refresh rate of 165 Hz, or 640 × 480 at a refresh
rate of 60 Hz�
Getting further help
If you still can't solve your problem, please contact the Lenovo Support Center� For more information
on contacting the Support Center, please see "Appendix A� Service and Support" on page A-1
Chapter 3 Reference information 3-7
Advertisement
Table of Contents
