LG Studio LSFS213ST Owner's Manual page 45

BEFORE CALLING FOR SERVICE
Problem Possible Causes
Not dispense • New installation.
water
• Freezer door is not closed
completely.
• Refrigerator is not connected
to a water supply and the
supply shutoff valve is not
turned on.
• The water pressure is not
more than 20 psi.
• Home filter or reverse osmosis
system is used.
• The display is not set properly
for water to come out.
• Water filter need to be
changed.
Water is leaking • Glass was not being held
from the under the dispenser long
dispenser. enough.
• New installation.
NOTE: One or two
• Recently water filter was
drops of water after
changed.
dispensing is
normal.
Other Please thoroughly read the Automatic Icemaker and Operating the Dispenser sections in
this manual.
(CONT.)
Solutions
• Flush and fill the water system.
• If any door is not closed completely, the water is
never dispensed.
• Connect refrigerator to water supply and turn water
shutoff valve fully open.
• The water pressure to the home determines the flow
from the dispenser.
• This can decrease water pressure. It is
recommended to remove reverse osmosis for
normal operation of water dispenser.
• Look on the right side of the display to see if the
display lock is engaged. If locked, it will not
dispense. Unlock the dispenser, if necessary.
• The filter should be changed every 6 months or
more often depending on usage. The filter can get
buildup of foreign particles and slow the water
pressure.
• Hold the glass under the dispenser 2 to 3 seconds
after releasing the dispenser lever.
• Flush and fill the water system.
• Flush the water system.
45