Table of Contents
Advertisement
CSE and Analyst Important Notes and Limitations
Service
1.
Service: A 30 day grace period license supplied on all new models shipped. Provides 30 non-
consecutive days of run time (e.g. days powered off do not count).
2.
A permanent or 1 year license is required at setup or before the 31st day of up-time.
Service: Please see "FFPS Software Download Manager UI" for remote Software Updates
3.
that may be available for your system.
Color Management
Calibration: The FFPS comes pre-calibrated with "out-of-the-box" great color, However you
1.
may want to Calibrate and Profile for optimal Image Quality, Customer can also choose for
the platen calibration.
The i1spectrophotometer option is a "plug and play" hardware only option. Platen and i1
2.
produce very good quality and are nearly equal for normal calibration. However, an i1
hardware unit is needed to perform the FFPS advanced profile setups.
3.
Special instruction while using larger stocks US Ledger and A3 for scanner based calibration
The procedure for placing the sheet to do Scanner Based Calibration for US Ledger
and A3 stocks:
US Ledger - Fold or Cut the US Ledger printed Target sheet into half to make it as US Letter
with the Target image printed.
A3 - Fold or Cut the US Ledger printed Target sheet into half to make it as A4 with the Target
image printed.
Similarly in IOT, Select US Letter/A4 stocks for Original Size -> Manual Size ->Appropriate
Stock [US Letter/ A4 accordingly].
Scanning & Imaging
1.
Adobe PDF Print Engine is supported and is a standard queue button on all FFPS Xerox J75.
A customer can choose to use either the legacy PDF or new APPE print paths for their PDF
workflows. The default queue setting is the traditional (aka legacy) PDF print path. Xerox
recommends testing key apps on both pathways for image quality and performance.
2.
No Page Parallel RIP is available for the Xerox Color 560/570.
Security
1.
Data Overwrite is Standard and included on all FFPS Xerox Color 560/570. This function
fully wipes and clears all drives, all partitions and all applications. This 4 pass DOD approved
algorithm can take several hours and the OS/FFPS software will need to be reloaded.
Networking
AppleTalk Protocol is available but is not "on" by default. Modern Mac OS uses TCP/IP. For
1.
legacy AppleTalk protocol, Click "enable" AppleTalk in the FFPS Network User Interface.
Service Read Me
6
Advertisement
Table of Contents
