Table of Contents
Advertisement
Figure 10
Figure 11
Recheck all assembly points to ensure a
secure column.
10. Next, install the pedals. Place a small
amount of lubricant such as lithium grease
on the thread before installing (Figure 12).
PLEASE NOTE that the Right and Left
pedals are labeled with an R or L sticker on
them. The right pedal screws in clockwise
while the left pedal is a reverse thread
and screws in counterclockwise. Tighten
with a 15 mm open-end wrench (Figure
13). Remember the Right Pedal Tightens
Clockwise, and the Left Pedal Tightens
Counter-Clockwise.
COMMENTS/QUESTIONS? EMAIL SUPPORT@YOLOBIKE.COM
Figure 12
Figure 13
11. For proper gear adjustment the cable
tension must be checked to ensure there
is no slack and/or excessive tension in
the cable when it is in the highest (fastest
gear). Failure to do this can result in poor
gear changes.
Apply lubricant to the chain and sprockets
regularly. There are many choices which
include Teflon, wax, and ceramic-based
lubricants on the market.
12. Proper tire inflation for your All-Terrain tires is
recommended at 20 +/- PSI. You should monitor
regularly to ensure best performance from each
tire. Correct tire pressure is critical to the peak
performance of the bike.
13. For connection of the battery to the
bike please ensure that no other plug
is ever connected to the main battery
slot and that the Beach Bolt battery is
completely locked onto the bike frame
when connected to the bike. To unlock the
8
Advertisement
Table of Contents
