Yolo Electric Beach Bolt Owner's Manual page 15

BATTERY CHARGER
After unlocking the battery assembly with the
battery key, the battery slides out horizontally
(Figure 3). After charging, replace the battery
by sliding back into place through the rear
rack system. Firmly reconnect to the frame
before locking in position with the key. After
use always charge your battery fully for best
performance. There is no memory effect so
you can charge the battery after short rides
without damage.
The charger will recharge a fully depleted
battery in 4-6 hours. The LED will turn
red when charging then green when fully
charged. It is recommended to always unplug
Figure 3
the charger once complete.
Check to make sure unit is charged in a 115-120v outlet. Take care not to drop the charger
as it has sensitive electronics inside and damage may result. Do not cover with any material
or substance that may restrict airflow into the charger. The charger needs to be able to
"breathe" and be kept cool so avoid subjecting the battery to high temperatures, such as
direct sunlight, for extended periods of time. Do not submerge the battery in water while on
or off the bike or while riding.
Remember that charging the bike each time you use it will ensure longer life of the battery.
DO NOT leave the battery discharged for long periods. This will damage the lifespan of the
battery. Never open the charger or change the settings on the charger.
15
COMMENTS/QUESTIONS? EMAIL SUPPORT@YOLOBIKE.COM