Yolo Electric Beach Bolt Owner's Manual page 11

Figure 21
will need to loosen the red reflector to give
open access to the hex screw. Make sure the
screw is tightened securely once the seat is
in its desired position.
21. Sometimes the wheel or pedal will
rub the kickstand or the bike's standing
position is off balance. The kickstand
position can be adjusted by using a 6 mm
Allen wrench in one of the three, 6 mm
Allen screws (Figure 23).
This concludes the standard assembly
of the YOLO® Beach Bolt e-bike. We
recommend giving every component a
thorough check before riding.
COMMENTS/QUESTIONS? EMAIL SUPPORT@YOLOBIKE.COM
Figure 22
Figure 23
11