Download Print this page
Daikin LXE10E -A33 Service Manual

Daikin LXE10E -A33 Service Manual

Marine type container refrigeration unit

Advertisement

Available languages

Available languages

Quick Links

https://daikin-p.ru
Marine type Container Refrigeration Unit
Service Manual · Parts List
Optional Functions
LXE10E -A33
TR06-04

Advertisement

loading

Summary of Contents for Daikin LXE10E -A33

  • Page 1 Marine type Container Refrigeration Unit Service Manual · Parts List Optional Functions LXE10E -A33 TR06-04...
  • Page 2 Covered Models Regarding the features and operation of the unit, this service manual describes the items which are different from those of the service manual TR01-09A. Different points from service manual Item (Maintenance and Repair) 1☆ Dehumidification function Refer to the details in the following pages.
  • Page 3 *Differences from standard model service manual (TR01-09A) are marked with ☆ CONTENTS Safety Precautions 3.10 Chartless function ........3-56 • Danger ..............3 3.10.1 Chart indication function ....3-56 • Warning ............... 4 3.10.2 P code (Pull down time indication) ..3-58 •...
  • Page 4 1. Introduction 1.1 OPERATION RANGE Use the units within the following range. Item Operation range Ambient temperature range -30˚C to +50˚C (-22˚F to + 122˚F) Inside temperature range -30˚C to +30˚C (-22˚F to + 86˚F) 50Hz: 380V/400V/415V, 60Hz: 440V/460V Voltage Voltage fluctuation rate should be within ±10%...
  • Page 5 2. General description 2.1 Main specifications Model LXE10E Item Condenser cooling system Air cooled type Controller DECOS3d Power supply AC 3-phase 380V/400V/415V 50Hz, 440V/460V 60Hz Compressor Hermetic scroll type (Motor output: 5.5kW) Evaporator Cross fin coil type Air-cooled condenser...
  • Page 6 2.2 Names of components 2.2.1 Outside LXE10E 2 1 2 0 1 9 1 6 1 5 q Access panel !6 Discharge pressure regulating valve (DPR) w Thermometer check port (Return air) !7 Compressor suction pipe temperature e Condenser fan motor (CFM)
  • Page 7 2.2.2 Inside LXE10E q Evaporator fan motor (EFM) w Evaporator e Supply air temperature sensor (SS) Data recorder supply air temperature sensor (DSS) r Evaporator outlet pipe temperature sensor (EOS) t Evaporator inlet pipe temperature sensor (EIS) y Return air temperature sensor (RS)
  • Page 8 –6 –5 –4 –3 –2 –1 DECOS DAIKIN ELECTRONICCONTAINER OPERATION SYSTEM q Controller operation panel (EC3, 4) !2 Fuse (Fu1-6) w MANUAL DEFROST key !3 Rechargeable battery (BAT) e UNIT ON/OFF key !4 Voltage indicator r Phase correction contactor (PCC1,2)
  • Page 9 2.3 Set point of functional parts and protection devices Device name Actuation Set point Detection method Symbol High-pressure switch 2400kPa (24.47kg/cm High-pressure switch 1900kPa (19.37kg/cm Water pressure switch 98kPa (1.0kg/cm Water pressure switch (optional) 39kPa (0.4kg/cm Chilled mode +30.0°C ~ –10.0°C Set point temperature (+86.0°F ~ –14.0°F)
  • Page 10 2.4 OPERATION MODES AND CONTROL The relationship between the operation mode and setting temperature is as follows. Operation mode Setting temperature Control sensor Operation description –10.1˚C to –30.0˚C Return air Frozen mode Compressor ON/OFF control (13.82˚F to –22.0˚F) temperature sensor Capacity control operation +30.0˚C to –10.0˚C...
  • Page 11 3 Dehumidification mode The unit have dehumidification control by a reheat coil, which is under the evaporator coil. To execute dehumidification, controller setting is required. (Refer to Page 3-12) In dehumidification, the Reheat Solenoid Valve (RSV) opens to flow high pressure and high temperature refrigerant to reheat coil.
  • Page 12 4. Mode Operation MODE Press the key in current indication mode to move to MODE operation. All indication Lights on (for 3 sec.) Starting Preparation (for 18 sec.) Current indication (Operation state) MODE MODE OPERATION In mode operation, the following settings/operations are available.
  • Page 13 5 Alarm display and back-up function 5.1 Alarm list Alarm Alarm Alarm content Action with alarm grouping code F101 HPS activated within 30 seconds after operation start or protection device Unit stops activated 5 times at start-up operation or Fuse 1 brown (Refer Page 7-7).
  • Page 14 6.1 Specifications Controller can use Rechargeable batteries. The battery is positioned on CPU & I/O box in controller box. Rechargeable: DAIKIN original rechargeable battery 6.2 Function This battery is used without main power supply for the following functions. 1) Display wake up (Refer to chapter 3.3.2) page 3-11.
  • Page 15 6.4 Battery replacement (Rechargeable battery) Detach the cover of battery and replace the battery Rechargeable battery (Battery fixing plate) Voltage indicator (Battery check meter) 3-40...
  • Page 16 8 Electronic expansion valve (2) Replacing the body Model Coil : EBM-MD12MD-30 q Loosen the lock nut, then remove the coil. Body : EDM-B804DM-1 w Remove the hexagonal head bolts, and cut This unit adopts an electronic expansion valve.
  • Page 17 9. APPENDIX 9.1 Piping diagram HEAT EXCHANGER SERVICE PORT (HIGH) (QUICK JOINT TYPE) SERVICE PORT (HIGH) CHECK VALVE RECEIVER (QUICK JOINT TYPE) LIQUID INDICATOR DRIER SERVICE PORT (HIGH) (QUICK JOINT TYPE) SERVICE PORT (LOW) HEAT EXCHANGER (QUICK JOINT TYPE)
  • Page 18 9.2 Schematic wiring diagram...
  • Page 19 9.3 Stereoscopic wiring diagram...
  • Page 20 ORDERING INSTRUCTIONS The parts list contains the parts of the DAIKIN Marine Type Container Refrigeration Units. Please read the following items before using the list. 1. When ordering the parts, be sure to specify the model No., the name of part and the type of part.
  • Page 21 Denomination of Model Name L X E NOMINAL HORSE POWER 5 : 5 10 : 10 CONDENSER COOLING TYPE NIL : AIR and WATER COOLED TYPE A : AIR COOLED TYPE OPTION NUMBER Note) "R" GIVEN AFTER OPTION NUMBER STANDS FOR "REVISION"...
  • Page 22 C O N T E N T S 目 次 Page A. Parts related with the unit(outside)………………………………………………………………………22 庫外関連部品 B. Parts related with refrigerant piping(outside) …………………………………………………………24 庫外冷媒配管関連部品 C. Parts related with the unit(inside) ………………………………………………………………………28 庫内関連部品 D. Parts related with refrigerant piping(inside) …………………………………………………………30 庫内冷媒配管関連部品...
  • Page 23 Parts related with the unit(outside) 庫外関連部品 (Refer to 55Page) (Refer to 54Page) (Refer to 55Page)
  • Page 24 Parts related with the unit(outside) 庫外関連部品 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数 1549647 Power plug (400V class) 3P130172-1 電源プラグ(400V) 0954936 Condenser fan motor 3P005566-1 凝縮器電動機 0980618 Fan blade (outside) P44H11S プロペラファン庫外側...
  • Page 25 Parts related with refrigerant piping(outside) 庫外冷媒配管関連部品 B11詳細(Detail of B11) B7-6 Discharge pipe Feeler bulb inserting pipe B21詳細(Detail of B21) B7-4 B7-3 B21 B12 B7-1 断面A-A 断面A-A B13詳細(Detail of B13) Suction pipe Feeler bulb inserting pipe B7-5 B8-1-1 B8-1-2 B7-7 B7-2 B8-1-3 B8-1-5 B8-1-4 B6-1 B8-1 B3-2 B5-2...
  • Page 26 Parts related with refrigerant piping(outside) 庫外冷媒配管関連部品 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数 1199415 Compressor JT224D-NYR 圧縮機 1387173 Air cooled condenser 2P089486-1 CA-LXE10E1 空冷凝縮器 Discharge pipe ass'y 2P117329-1 吐出配管組立品...
  • Page 27 Parts related with refrigerant piping(outside) 庫外冷媒配管関連部品 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数 B8-1-4 1270408 Body, suction modulating valve 2P078385-1-KE 吸入比例弁弁本体 B8-1-5 1270415 Cover band, suction modulating valve 吸入比例弁カバーバンド...
  • Page 28 Parts related with refrigerant piping(outside) 庫外冷媒配管関連部品 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数...
  • Page 29 Parts related with the unit(inside) 庫内関連部品 Option Option E57詳細(Detail of E57) Sealing compound (KE44RTV or its equivalent) シール剤 (KE44RTV又は相当品) INSIDE OUTSIDE PUTTY (Equivalent of NEO-SEAL B-1) パテ (ネオシールb-1相当品) C3 C6 C40 C39 A部詳細(Detail of A) C17-2 <Without recorder> RS(Blue) DRS(Blue・Red) C17-1 C23詳細(Detail of C23)
  • Page 30 Parts related with the unit(inside) 庫内関連部品 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数 0955333 Three phase AC fan motor 3PA07524-4 三相交流ファン電動機 0955340 Three phase AC fan motor 3PA07524-5 SPRK91A‐42...
  • Page 31 Parts related with refrigerant piping(inside) 庫内冷媒配管関連部品 D4詳細(Detail of D4) D3-3 D3-7 D3-4 D3-5 Feeler bulb inserting pipe D3-2 D3-2 D5詳細(Detail of D5) D3-8 D3-6 D3-9 D3-1 D3-10...
  • Page 32 Parts related with refrigerant piping(inside) 庫内冷媒配管関連部品 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数 1683927 Evaporater ass'y 2P163797-1 CRB-LXE10E9 蒸発器組立品 1683934 Ass'y for pipe of drain pan ドレンパン配管組立品 (レヒート) 2P167639-2...
  • Page 33 Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等) C詳細(Detail of C) B詳細(Detail of B) Tie wrap Wires E断面(Section of E) Condenser coil...
  • Page 34 Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等) ※(L = XX mm) indicates the length of cushion rubber E35.(Cut to suit pipe size.) ※(L = XX mm)と表記のものは、緩衝ゴム(E35)の長さです。(配管のサイズに合わせて切って使用ください。) 矢視A/B(View A/B) 矢視D(View D) (L=50mm) 受液機器部詳細 (Receive part detail) (L=90mm) (L=60mm) ドライヤー部詳細  圧力センサー配管部詳細 (Dryer part detail) (Pressure tranducer detail) E31(L=40mm)
  • Page 35 Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等) EFM1 EFM2 矢視A(VIEW A)
  • Page 36 Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等) FAN GUIDE ファンガイド...
  • Page 37 Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等)...
  • Page 38 Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等) QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数 1266694 Set plate, discharge pipe 4P079462-1 Page33 吐出配管取付板 1584215 Nylon coating tube clamp ナイロンコーティング管止め金...
  • Page 39 Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等) QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数 1267123 Thermal insulation tube piping 4P011309-1 Page33,34 断熱筒配管緩衝材 1683989 EV outlet pipe 膨張弁出口配管防露筒...
  • Page 40 Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等) QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数...
  • Page 41 Control box コントローラボックス F7-5 F7-4 F7-7 F7-6 F7-3 F16-1 F16-2 F7-1 F7-2 F7-9 F7-8...
  • Page 42 Control box コントローラボックス F34-3 F34-2 F34-8 F34-4 F34-8-1 F34-10 F31-1 F34-1 F34-14 F34-7 F34-13 F34-12 F34-11 F34-6 F34-9 F34-11 F34-5 F34-15...
  • Page 43 Control box コントローラボックス QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数 1136407 Hinge (recorder/box cover) 平蝶番(レコーダボックス蓋) 4P021346-1 1136414 Patch plate nut 4P044898-2 当板ナット 1622496 C.BOX welding ass'y コントロールボックス溶接組立品 2P098553-4 1683996 C,BOX cover ass'y コントロールボックス蓋組立品...
  • Page 44 Control box コントローラボックス QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数 F34-8 1250783 PC board for suction modulating valve プリント基板組立品 (吸入制御弁用) 3P065441-1 EC0058 F34-8-1 0445432 Fuse, Controller 4SA42006-3 250V5A 制御用ヒューズ...
  • Page 45 Control box コントローラボックス QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数 1684470 Indication plaque 4P172617-1 表示銘板...
  • Page 46 Control box コントローラボックス QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数...
  • Page 47 Parts related with name plate 銘板関連 コントロールボックス内部(Inside of Control Box) 電磁弁配置銘板貼付位置詳細 (Detail location of nameplate, solenoid valve) Name plate, solenoid valve 電磁弁配置銘板G9 A断面(Section A)
  • Page 48 Parts related with name plate 銘板関連 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数 1684045 Name plate, ventilator 4P176172-1 換気口銘板(%併記仕様) 1267952 Name plate, ventilator arrow 4P018502-1 ベンチレータ矢印銘板 1646081 Name plate, operation 操作銘板...
  • Page 49 Parts related with option 1 – USDA オプション関連部品1 – USDA関連 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数 1622580 Mounting plate ass'y, receptacle USDA取付板(樹脂) 2P146266-1 0991531 PC port connector 3P010803-1 パソコンポートコネクタ...
  • Page 50 Parts related with option 2 – MODEM オプション関連部品2 – モデム MODEM モデム Supply by customer 客先支給 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数 0954640 Noise filter 2PA51273-1 ZAC2206-11 ノイズフィルタ...
  • Page 51 Parts related with option 3 – Others オプション関連部品3 – その他 1.Indoor fan guard 1.庫内ファンガード 2.Evaporator coil 2.蒸発器コイル組立品...
  • Page 52 Parts related with option 3 – Others オプション関連部品3 – その他 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME 1台当たりの 部品名称 符号 部品番号 図面番号 形式 仕様 備考 所要数 1605299 Inside fan cover 庫内ファンカバー(P&ON) 3P150480-1 1605484 Fixture 4P150653-1 固定具(網・中央)...
  • Page 53 List of size for standard pipe clamp 配管固定具サイズ表 1.Resin clamp 1.樹脂バンド (外穴) (OUTER HOLE) (内穴)(外穴) (INNER HOLE)(OUTER HOLE) (INTERMEDIATE HOLE) (内穴)(中穴)(外穴) (INNER HOLE)   (OUTER HOLE) PARTS NO. DWG NO. SIZE サイズ PARTS NAME 部品名称 符号 部品番号 図面番号 使用個数 E10 1222764 Resin clamp NE41015-9 26.9...
  • Page 54 List of size for standard pipe clamp 配管固定具サイズ表 2.Tube clamp 2.管止金 2-φ5.5穴 SIZE サイズ PARTS NO. DWG NO. PARTS NAME 部品名称 符号 部品番号 図面番号 使用個数 1592425 Tube clamp 管止め金 NE31016-58 E15 0782775 Tube clamp 管止め金 NE31016-51 E16 1584215 Nylon coating tube clamp ナイロンコーティング管止め金 4P143802-51 E17 1584208 Nylon coating tube clamp ナイロンコーティング管止め金...
  • Page 55 Notes for ordering spare parts 部品発注の際の注意事項 1.Parts recommended to be ordered together with packing, gasket, sealing material and name plate 1.発注の際にパッキングやシール材、銘板等の同時発注を推奨する 部品 For ordering following spare parts, we recommend that you order the following packing, gasket, sealing material and name plate together at the same time. 上記のサービス扉やボックスカバーを発注の際には、下記のパッキングを同時に発注 することをおすすめします。 (1)Service door (1)サービス扉 PARTS NO. DWG NO. REMARKS PARTS NAME 部品名称 符号 部品番号 図面番号 備考 (Without cushion and sealing material) 1612576 Access panel (FRP) サービス扉組立品 1P006678-5 (クッション材、...
  • Page 56 Notes for ordering spare parts 部品発注の際の注意事項 (3)Ventilation cover (3)換気口蓋 PARTS NO. DWG NO. PARTS NAME 部品名称 符号 部品番号 図面番号 A19 0981060 Ventilation cover 換気口蓋 3P003175-1 Sealing material シール材 A20 1266221 4P016185-1 (Ventilator) (換気口) (4)Front plate (CA) (4)前板(CA) PARTS NO. DWG NO. PARTS NAME 部品名称...
  • Page 57 Notes for ordering spare parts 部品発注の際の注意事項 2.Order for motorized valve, solenoid valve and pressure regulating valve 2.電動弁・電磁弁・圧力調整弁の発注 Refer to the following table for the name, main body, solenoid coil and ass'y of solenoid valves etc. applied to this model. この機種に使用されている電磁弁等の名称と本体・ コイル・組立品は下記のとおりです。 Common Parts 共通部品 Body/Coil PARTS NO. DWG NO. PARTS NAME 部品名称 本体/コイル 符号 部品番号 図面番号 B7-3 1256495 Electronic expansion valve body ass'y 電子膨張弁本体組立品 2SA50010-2-KU 本体 Body 1.EV コイル Coil...
  • Page 58 Notes for ordering spare parts 部品発注の際の注意事項 3.Order for pressure trasducer 3.圧力センサーの発注 Refer to the following table for the pressure transducer applied to this model. For ordering pressure transducer, we recommend that you order the following best shrinkable tube together at the same time. この機種に使用している圧力センサーは下記の通りです。 圧力センサー発注の際は、下記の熱収縮チューブを同時に発注することをおすすめし ます。 PARTS NO. DWG NO. TYPE REMARKS 呼称名 PARTS NAME 部品名称 形式 備考 符号 部品番号 図面番号 B16 1600559 High pressure transducer 高圧圧力センサ 3P141602-1 NSK-BD030F-070 B15 1600542 Low pressure transducer 低圧圧力センサ...
  • Page 59 Notes for ordering spare parts 部品発注の際の注意事項 4.Order for temperature sensor 4.温度センサーの発注 Refer to the following table for temperature sensors applied to this model. この機種に使用されている温度センサーは下記の通りです。 Lot marks Type No. 表示 型番表示 Lot marks Type No. LOT 表示 型番表示 5Y01  ST9503-1- 1210  ST9701- Length Length ※Operating temp. range ー30〜+150℃ ※Operating temp. range ー30〜+70℃ 使用温度範囲 ー30〜+150℃ 使用温度範囲 ー30〜+70℃ Lot marks Type No. LOT 表示 型番表示 7828  ST9703-1 Length ※Operating temp. range ー30〜+15℃...
  • Page 60 Measuring and adjusting tools 測定調整用工具 1.Tools for emergency operation 1.緊急運転用工具 PARTS NO. DWG NO. ILLUSTLATION PARTS NAME 部品名称 用途 姿図 符号 部品番号 図面番号 For electronic Emergency coil エマージェンシー expansion 1080263 3P017370-1 valve コイルキャップ 電子膨張弁用 Suction modulating E m e r g e n c y エマージェンシー...
  • Page 61 Measuring and adjusting tools 測定調整用工具 (1)Parts No. (1)部品番号 PARTS NO. REMARKS PARTS NAME 部品名称 符号 部品番号 備考 RS232C reverse (cross) type Local supply 接続ケーブル Connection cable (reverse) 市販品 (リバース) RS232Cリバース(クロス)型 9993324 Connection cable 接続ケーブル Adapter D-sub 9P, Male-Male Local supply アダプター...
  • Page 62 Head Office. Umeda Center Bldg., 4-12, Nakazaki-Nishi 2-chome, Kita-ku, Osaka, 530-8323 Japan. Tel: 06-6373-4338 Fax: 06-6373-7297 Tokyo Office. JR Shinagawa East Bldg., 10F 18-1, Konan 2-chome, Minato-ku Tokyo, 108-0075 Japan. Tel: 03-6716-0420 Fax: 03-6716-0230 TR06-04 (2006.02.00021)NK...