Changing The Led Bulbs - Midea EM044K6BC-P3 User Manual

Changing the LED bulbs

Countertop light (exterior)
1 Disconnect power to your microwave at the circuit breaker or by unplugging it.
2 Remove the screws holding the base plate in place, then swing the base plate down to access the
•
CAUTION: The light cover may become very hot. Do not touch the glass when the light is on.
BOTTOM
3 Remove the old light bulb, then replace with a new bulb.
•
CAUTION: Do not use a bulb higher than 30 watts.
4 Swing the base plate back into place and secure it with the screws.
Microwave light (interior)
Screws
(No interior light shown in the source manual. Please confirm)
1.6 Cu. Ft. Over-the-Range Microwave
Screws
LED bulb
Screw
LED bulb.
Screws
15