Table of Contents
Advertisement
Spill safe glass shelves (where fitted)
Spill safe glass shelves keep spills on the shelf. A shelf
retaining system minimizes accidental movement of shelves.
The shelves can be adjusted to many different heights. Spill
safe glass shelves are not to be used as slide out shelves.
Front of shelf
Split Glass Shelf (where fitted)
This shelf can be used either as a full depth shelf or when tall
items need to be stored at the front of the appliance it can
be collapsed to half its original depth.
To collapse the shelf:
• Pull the front half of the
shelf forward (1), then, from
the underside, lift the front half
of the shelf by raising the rear
edge over the recessed hook
detail (2).
• Pull the shelf forward and allow the rear to drop into the
side channels.
• Push the front shelf backwards (3,4) until it reaches the
rear stops.
Repositioning:
The shelf can be repositioned within the appliance unit by
pulling the whole assembly out until the side panels are free
to pivot down, then pivoting the rear of the shelf until the
shelf is free from the liner runners. The shelf can then be
positioned in any of the runners – this is a very useful feature
if your appliance door happens to have limited access.
4 - Operating your appliance
Deodoriser (where fitted)
Your appliance is fitted with a catalysing deodoriser to assist
with the removal of food odours inside your appliance.
Odours
are
removed
by adsorbtion through
the filter by the normal
operation
of
appliance (see diagram
1).
Keeping
food
covered and wrapping
food with plastic wrap
will also help to reduce
the odours inside your
appliance.
Bottle Snugger operation (where fitted)
The bottle snugger is used to prevent bottles from falling
over. The snugger consists of two parts, a sliding front,
and a rotating retainer ring. The retainer ring can be rotated
through 360° but has positive locations for horizontal and
vertical positions.
The snugger can be used in two positions:
Horizontal
When the snugger ring is
horizontal (A), any item that fits
within the ring can simply be
placed inside it.
Vertical
When the snugger ring is
vertical (B), it is possible to
simply slide the snugger along
the bottle retainer bar until it
is pushed up against a bottle.
Note: the bottle should be
constrained on the other side
by either the end of the bin or
other adjacent bottles.
Page 10
the
Diagram 1
A
B
Advertisement
Table of Contents
