Advertisement
Installation
Your Retractable Hose Reel should be installed nearest
to your chosen water source for convenience of use.
1. Check the TAP-TO-REEL HOSE can reach your
tap prior to installing the WALL BRACKET
(1120H/CD1120C/1130H)
MAX 1m (1110H)
d
2. Take the WALL BRACKET and place it
against either a wall or wooden post
3. Mark inside the centre of each of the
bracket holes to prepare for drilling
» If you are attaching your Hose Reel to a wooden
post, you will not require the WALL PLUGS as the
COACH BOLTS can screw directly into wood.
4. Use the table below to select the correct
drill bit for your Hose Reel
» If using plugs that were not included with your
Hose Reel, drill slightly undersize as masonry
materials all have different properties which
will ensure the wall plugs have a secure fit.
PLUG
MASONRY DRILL
WOOD DRILL
BOLT
MAX 2m
It is very important to use the correct size drill bit,
so a very secure fit of the wall bracket is made
before installing the Retractable Hose Reel.
5. When ready, drill all four holes, then
hammer the WALL PLUGS gently into
your wall (if attaching to a wall)
1120H 20m or
1110H 10m
CD1120C 20m
7.7mm
7.5mm
5.0mm
6.0mm
1130H 30m
11.7mm
11.7mm
10.0mm
10.0mm
7.0mm
8.0mm
c
7.0mm
8.0mm
3 of 8
Advertisement
