LG LWD3081 User's Manual And Cooking Manual page 37

BEFORE CALLING FOR SERVICE
Problem
Food does not • Oven controls improperly set.
bake or roast
properly • Rack position is incorrect or the rack is not level.
• Incorrect cookware or cookware of improper size being used.
• Oven sensor needs to be adjusted.
Food does not broil • Oven controls improperly set.
properly
• Improper rack position being used.
• Cookware not suited for broiling.
• Aluminum foil used on the the broiling pan and grid has not been fitted properly and
• In some areas the power (voltage) may be low.
Oven temperature • Oven Sensor needs to be adjusted.
too hot or too cold
Oven will not self- • The oven temperature is too high to set a self-clean operation.
clean
• Oven controls improperly set.
• A self-clean cycle cannot be started if oven door is opened.
Crackling or • This is the sound of the metal heating and cooling during both the cooking and
popping sound
Excessive smoking • Excessive soil.
during a self clean
cycle
Oven door do not • Oven is too hot.
open after a self
clean cycle
Possible Causes / Solutions
- See the using the oven section.
- See the using the oven section.
- See the using the oven section.
- See the adjusting your oven temperature in option section.
- Make sure you press the BROIL pad.
- See the Broiling Guide, page 19.
- Use the broiling pan and grid that came with your oven.
slit as recommended.
- See the using the oven section.
- Preheat the broil element for 10 minutes.
- See the Broiling Guide, page 19.
- See the adjusting your oven Temperature in option section.
- Allow the oven to cool and reset the controls.
- See the using the self-cleaning oven section.
cleaning functions.
- This is normal.
- Press the CLEAR/OFF pad. Open the windows to rid the room of smoke. Wait until
the self-clean mode is cancelled. Wipe up the excess soil and reset the clean.
- Allow the oven to cool below locking temperature.
(cont.)
37