C-bow soft bag holder for yamaha fz1 2006 (6 pages)
Summary of Contents for hepco & becker 630.253 black
Page 1
C-Bow KAWASAKI KAWASAKI Ninja 300 Ninja 300 4002.047.131 Art.-Nr.: 630.253 schwarz Art.-Nr.: schwarz Montage Der Bausatz umfaßt die folgenden Teile: Stück Bestellnr. Bezeichnung 700007063 C-Bow schwarz 700008247 Halteadapter hinten 700008248 Halteadapter vorne rechts 700008249 Halteadapter vorne links Tipp: 150.829 Sechskantschraube M6x18 Schrauben sie alle Teile an und lassen sie die zugänglichen 150.784 Inbusschrauben M8 x 30...
Page 2
C-Bow KAWASAKI KAWASAKI Ninja 300 Ninja 300 4002.047.131 Art.-Nr.: 630.253 schwarz Art.-Nr.: schwarz Montage Vorbereitung: Die Kennzeichenhalterung demontieren. Die Steckverbindungen der Beleuchtung müssen nicht getrennt werden. Montage des hinteren Halteadapters: Der hintere Halteadapter wird zwischen Heck und Kennzeichenhalterung verschraubt. Die Verschraubung erfolgt vonoben mit den Inbusschrauben M6 x 25mm und Karosseriescheiben 6,4 x 18.
Page 3
C-Bow KAWASAKI KAWASAKI Ninja 300 Ninja 300 4002.047.131 Art.-Nr.: 630.253 schwarz Art.-Nr.: schwarz Montage Montage der C-Bow links + rechts: An den zuvor montierten Halteadaptern mit den Sechskantschrauben M6x18 sowie U-Scheiben Ø6,4.
C-Bow KAWASAKI KAWASAKI Ninja 300 Ninja 300 4002.047.131 Item - No.: 630.253 black Item - No.: black Assembling instructions The kit includes the following parts: Quant item no. description 700007063 C-Bow black 700008247 rear adapter 700008248 front adapter right 700008249...
Page 5
C-Bow KAWASAKI KAWASAKI Ninja 300 Ninja 300 4002.047.131 Item - No.: 630.253 black Item - No.: black Assembling instructions Preparing: Dismantle the number plate holder. The connectors of the lighting must not be separated. Fastening of the rear adapter: between frame and number plate holder with allen screws M6 x 25mm and body washers 6,4 x 18.
Page 6
C-Bow KAWASAKI KAWASAKI Ninja 300 Ninja 300 4002.047.131 Item - No.: 630.253 black Item - No.: black Assembling instructions Fastening of the C-Bows right + left: at the front and rear adapters, mounted before. Use hexagon bolts M6x18 with washers Ø6,4.