Specifications - Clean Logix BLX-MR2-CC User Manual

USER MANUAL: BLX-MR2-CC
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Overview
The Compliance Counter add-on allows for automated
tracking and activation verification for the MR2
footwear sanitizer system. The pneumatic, 4-digit
counter records the number of successful activations
performed by the Mister 2. The system includes a
manual reset button and window shield to protect
from spray/debris or tampering.
The accessory kit includes all components necessary
to integrate into any existing unit.

Specifications

▪ Construction: 304 Stainless Steel, polycarbonate,
polypropylene
▪ Weight: 2 lbs.
▪ Dimensions: 11.75" x 3.125" x 9.5"
298.45 x 79.375 x 241.3 mm
▪ Connection Size: 1/4" OD tubing or similar
(5 ft. included with unit)
PROTECT THE ENVIRONMENT
Please dispose of packaging materials, old machine
components, and hazardous fluids in an environmentally safe
way according to local waste disposal regulations.
Always remember to recycle.
Specifications and parts are subject to change without notice.
BLX-MR2-CC Manual Page 3 of 7
Requirements
▪ Compressed Air: 30 PSI minimum*
*NOTE: Minimum pressure output for
pneumatic counter only. Consult User Manual
included with MR2 sanitizing system for
system requirements.
▪ Liquid Temperature Range: 40-100°F (4-37°C)
▪ Chemical compatibility: Chemical products used
with this equipment must be formulated for this
type of application and compatible with unit
materials and seals.
NOTE: For more information on chemical
compatibility consult the chemical
manufacturer, SDS for your product, or
contact our support department.
i
More Information?
Please contact your equipment representative
or manufacturer for further support.
Updated: 02/11/21