Advertisement
Step 3. Attach back base frame ② to side base frame 1B, secure with screws,
washers & nuts as shown in chart #3.
Repeat same manner to other side of base frame 1B.
Do not over-tighten the screws/nuts at this step.
chart #3
1B
Step4. Attach side base frame 1B, handle front base frame 1A together,
secure with screws, washers & nuts. As shown in chart# 4.
Note: ensure concave legs facing inside as shown in chart# 4.
Once the frame is assembled completely, make sure it is stable each foot
set on the ground. Go back to tighten all screws & nuts now.
1B
1A
chart #4
Advertisement
