Operating Instructions - Klarstein Albaron Supreme Manual

When the "ADD WATER" indicator light flashes, it means that there is water
shortage in the water tank. You need to add water and press the POWER button to
restart the machine.
Ice full alarm
When the ice reaches the maximum capacity of the ice storage container, the "ICE
FULL" indicator light flashes, and the machine stops. At this time, the ice needs
to be poured out. When the ice position is lower than the full sensor position, the
machine will restart automatically.

OPERATING INSTRUCTIONS

Step 1
Open the lid and take out the ice collecting tray and add water to the reservoir.
Note: There is a maximum scale MAX in the reservoir. The water should not exceed
the MAX position. If the water exceeds the maximum scale MAX, you need to open
the bottom drain plug, release the excess water, and cover with a transparent
cover.
Step 2
Plug in the power and press the power button to start the machine.
• The three cycles used for the first time, the ice produced is small and irregular.
• When the ice collecting tray is full, please take out the ice immediately, do not
let the ice overflow the ice collecting tray.
EN
ADD WATER
ICE FULL
21